Ultraflex Vulite Pro Backlit Matte is a 15 oz. strong, quality, back-lit substrate that can be used for any back-illuminated indoor or outdoor sign, billboard or f ... Read More
Vinyl: Banner, Banner Media
Compatible with Solvent, UV Curable, Eco-Solvent Printers
Ultraflex Vulite Pro Backlit Matte is a 15 oz. strong, quality, back-lit substrate that can be used for any back-illuminated indoor or outdoor sign, billboard or flexible face application. A high-end, yet economical choice, Vulite Pro BL is specially engineered to avoid flow marks when back-lit.
| Product Type | Inkjet Printable Media |
| Paper Weight | 510 gsm |
| Applications - Media | Backlit |
| Finish | Matte |
| Ink Type | Solvent |
| UV Curable | |
| Eco-Solvent | |
| Media Type | Vinyl: Banner |
| Banner |
| Properties | Description |
| Material | Polyester |
| Total Weight | 510g or 15 oz/sq. yd. |
| Tensile Strength | 419/376 (lbs/inch) |
| Tear Strength | Weft 38, Warp 45 |
| Low Temperature Resistance | -20° C or -4° F |
| Fungus Resistant | Treated ASTM G21 |
| Flame Resistance | NFPA701, Title 19, CSFM, B1; DIN 75200 |
| Grommeting | Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability. |
| Tape & Stitched Hem | Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape. |
| Finishing/Post Process | Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal. |
54 in x 164 ft - 1 Roll (3 in Core) 
Earn 365 points
98 in x 164 ft - 1 Roll (3 in Core)
