Technical Specifications |
|
Roll Size(s) |
SANDNW54150: 54 in x 150 ft
SANDNW54300: 54 in x 300 ft
|
Material Type |
100% PVC face |
Texture |
Sand |
Backing |
Non Woven Backing |
Gauge |
18 mil |
GSM |
448 |
Weight |
20 oz linear yard |
Opacity |
100% |
Whiteness |
89.44 |
Brightness |
87.10 |
Finish |
Liquid top coatings can be used for added protection or desired finishes. To achieve Type II results, product must be paired with Marabu ClearShield Wall Armor. |
Gloss Level |
6.4 (60) |
RIP & Printer Media Settings |
For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software., If a custom profile is not available, the on-board media setting, Cast Vinyls, typically used for vehicle wraps, is a good place to start., Optimal printer settings will vary from printer manufacturers. A suggested starting point is setting the pre- and post-heaters to 122° F (50° C). |
Light Fastness |
Contact the ink manufacturer for light-fastness data., The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. |
L* |
94.33 |
A* |
-0.18 |
B* |
-0.62 |
Fire Rating |
Class A |
Core Size |
3 in ID core |
Optimal Service Enviroment |
For end use: -40° to 176° F (-40°-80° C)., For printing: 60° to 80° F, 50% RH relative humidity. |
Ideal Storage Conditions |
70° F (21° C), 50% RH (a controlled environment is recommended), store vertically in original packaging |
Color |
Bright white PVC |
Ink Compatibility |
Latex, Low-solvent, Solvent, UV-curable |
Shelf Life |
1 year storage in original package under recommended storage conditions above. |