1. /
  2. /
  3. /
  4. /
  5. /
  6. Ultraflex Ultralon® IV BL, 20oz - 196in x 164ft
Picture of Ultraflex Ultralon® IV BL, 20oz - 196in x 164ft

Ultraflex Ultralon® IV BL, 20oz - 196in x 164ft

Ultraflex Ultralon(r) IV BL (20 oz) is a gloss finish, durable specialty back-lit banner and billboard substrate that is made to last! ... Read More

196 in x 164 ft - 1 Roll

Be the first to review this product
Brand: Ultraflex
SKU: G385830-L20
Price: $5,694.75 ($2.13 / SQ. FT.)
Earn 5695 points
Check Availability

Ultraflex Ultralon® IV BL (20 oz) is a gloss finish, durable specialty back-lit banner and billboard substrate that is made to last! Extremely strong, Ultralon IV BL is the recommended material to use for long term outdoor back-illuminated applications. The unique gloss face-film produces vibrant and consistent color. It is compatible with solvent, eco-solvent, UV, screen printing and Latex inks. Available in widths of 126” and 196”.

Technical Specifications

Product Type Inkjet Printable Media
Paper Weight 680 gsm
Applications - Media Billboards
Banners
Outdoor Signage
Finish Gloss
Ink Type Solvent
UV Curable
Eco-Solvent
Latex
Media Type Vinyl: Banner
Banner
Width 196 in
Length 164 ft
Units 1 Roll
Edge Loyalty Points Multiplier 1x Edge Points
Properties Description
Material Polyester
Total Weight 680g or 20 oz/sq. yd.
Tensile Strength 3192/296.4 (lbs/inch)
Tear Strength Weft 67.5, Warp 67.5
Fungus Resistant Yes
Flame Resistance DIN 4102 B1; NFPA701, Title 19, CSFM, B1
Grommeting Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Tape & Stitched Hem Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape.
Finishing/Post Process Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal.

Customer Reviews

Be the first to review this product

  • Only registered users can write reviews

Review Breakdown 0 review(s)

5
0%
4
0%
3
0%
2
0%
1
0%
Copyright © 2024 LexJet - Inkjet Printers, Media, Ink Cartridges and More. All rights reserved.