Ultraflex Ultralon® IV BL (20 oz) is a gloss finish, durable specialty back-lit banner and billboard substrate that is made to last! Extremely strong, Ultralon IV BL is the recommended material to use for long term outdoor back-illuminated applications. The unique gloss face-film produces vibrant and consistent color. It is compatible with solvent, eco-solvent, UV, screen printing and Latex inks. Available in widths of 126” and 196”.
Product Type | Inkjet Printable Media |
Paper Weight | 680 gsm |
Applications - Media | Billboards |
Banners | |
Outdoor Signage | |
Finish | Gloss |
Ink Type | Solvent |
UV Curable | |
Eco-Solvent | |
Latex | |
Media Type | Vinyl: Banner |
Banner |
Properties | Description |
Material | Polyester |
Total Weight | 680g or 20 oz/sq. yd. |
Tensile Strength | 3192/296.4 (lbs/inch) |
Tear Strength | Weft 67.5, Warp 67.5 |
Fungus Resistant | Yes |
Flame Resistance | DIN 4102 B1; NFPA701, Title 19, CSFM, B1 |
Grommeting | Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability. |
Tape & Stitched Hem | Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape. |
Finishing/Post Process | Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal. |
126 in x 164 ft - 1 Roll
196 in x 164 ft - 1 Roll