Picture of Ultraflex Ultrablockout® Banner Pro, 15 oz - 80in x 164ft

Ultraflex Ultrablockout® Banner Pro, 15 oz - 80in x 164ft

UltraBlockout® Banner Pro 15 oz. is a blockout banner material with a uniquely constructed dual print surface. UltraBlockout® Banner Pro 15 oz. is engineered for high resolution, two-sided printing. ... Read More

Brand: Ultraflex

Availability: In stock
SKU: UBOP1520350
Price: $352.09 ($0.32 / SQ. FT.)
Earn 353 points

Ideal for any indoor application where opacity is required. Like the 20 oz. version, UltraBlockout® Banner Pro 15 oz. works with solvent, eco-solvent, UV, screen printing or Latex inks. Available in widths from 54” – 126”. Coated and printable on both sides, UltraBlockout Banner™ Pro 15 oz. is well suited for double sided signs and banners and may be used for indoor or outdoor applications under moderate weather conditions, or when complete opacity is necessary.

It is not for use with outdoor pole banners or boulevard banners. The back is slightly more textured than front, but produces quality color match from front to back.

Technical Specifications

Product Type Inkjet Printable Media
Paper Weight 510 gsm
Applications - Media Banners
Finish Matte
Ink Type Solvent
Latex
UV Curable
Eco-Solvent
Media Opacity Opaque
Media Type Vinyl: Banner
Banner
Core Size 3 in
Width 80 in
Length 164 ft
Units 1 Roll
Edge Loyalty Points Multiplier 1x Edge Points
Double Sided Yes
Durability Water Resistant
Indoor
Outdoor
Ink Type Solvent
Latex
UV Curable
Eco-Solvent
Properties Description
Material Polyester
Total Weight 510 g/m2 or 15 oz/yd2
Tensile Strength 220/138 (lbs/inch)
Tear Strength Weft 17, Warp 13
Temperature Resistance -40 to 70° C or -40 to 158° F
Fungus Resistant Yes ASTM G21
Flame Resistance Class A flame rating. NFPA701, Title 19, CSFM, ASTM E84, B1
Grommeting Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Tape & Stitched Hem Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape.
Finishing/Post Process Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal.

Customer Reviews


  • Only registered users can write reviews

Review Breakdown 0 review(s)

5
0%
4
0%
3
0%
2
0%
1
0%