Picture of Ultraflex UltraBanner® FL Gloss, 10 oz - 63in x 164ft

Ultraflex UltraBanner® FL Gloss, 10 oz - 63in x 164ft

UltraBanner® FL Gloss is a 10 oz. light-weight front-lit banner and billboard material that is best suited for short-term indoor or outdoor applications. Te ... Read More

Brand: Ultraflex

SKU: BF63WHTG
Price: $210.65 ($0.24 / SQ. FT.)
Earn 211 points
Check Availability

UltraBanner® FL Gloss is a 10 oz. light-weight front-lit banner and billboard material that is best suited for short-term indoor or outdoor applications. Tear and fade resistant, UltraBanner® FL is a great economical banner choice for UV, solvent, latex or screen-printing.

Technical Specifications

Product Type Inkjet Printable Media
Applications - Media Banners
Billboards
Finish Gloss
Ink Type Solvent
Latex
Eco-Solvent
UV Curable
Media Type Vinyl: Banner
Banner
Core Size 3 in
Width 63 in
Length 164 ft
Units 1 Roll
Edge Loyalty Points Multiplier 1x Edge Points
Double Sided No
Properties Description
Material Polyester
Total Weight 340g or 10 oz/sq. yd.
Tensile Strength 107/68 (lbs/inch)
Tear Strength Weft 13, Warp 13
Low Temperature Resistance -20 to 70° C or -4 to 158° F
Fungus Resistant Yes. ASTM G21
Flame Resistance Class A flame rating. Test Method DIN 4102. NFPA 701, Title 19, ASTM E84, UBC 26-6, UBC 26-7.
Grommeting Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Tape & Stitched Hem Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape.
Finishing/Post Process Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal.

Customer Reviews


  • Only registered users can write reviews

Review Breakdown 0 review(s)

5
0%
4
0%
3
0%
2
0%
1
0%