Ultraflex UltraBanner® FL (10oz) Matte

UltraBanner(r) FL is a 10 oz. light-weight front-lit banner and billboard material that is best suited for short-term indoor or outdoor applications. Tear and ... Read More

Vinyl: Banner, Banner Media
Compatible with Solvent, Latex, UV Curable, Eco-Solvent Printers

Be the first to review this product

Brand: Ultraflex

UltraBanner® FL is a 10 oz. light-weight front-lit banner and billboard material that is best suited for short-term indoor or outdoor applications. Tear and fade resistant, UltraBanner FL is a great economical banner choice for UV, solvent, latex or screen-printing.

Technical Specifications

Product Type	Inkjet Printable Media
Paper Weight	340 gsm
Applications - Media	Billboards
	Banners
Finish	Matte
Ink Type	Solvent
	Latex
	UV Curable
	Eco-Solvent
Media Type	Vinyl: Banner
	Banner

Properties	Description
Material	Polyester
Total Weight	340 g/m2 or 10 oz/yd2
Tensile Strength	107/68 (lbs/inch)
Tear Strength	Weft 13, Warp 13
Temperature Resistance	-20 to 70° C or -4 to 158° F
Fungus Resistant	Yes. ASTM G21
Flame Resistance	Class A flame rating. Test Method DIN 4102. NFPA 701, Title 19, ASTM E84, UBC 26-6, UBC 26-7.
Grommeting	Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Tape & Stitched Hem	Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape.
Finishing/Post Process	Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal.