Picture of Ultraflex SuperSmooth Blockout - 54in x 98ft

Ultraflex SuperSmooth Blockout - 54in x 98ft

SuperSmooth(tm) Blockout is a 15 oz. smooth, scrimless, blockout banner material best suited for double sided signs and banners, compatible with UV, solvent o ... Read More

Brand: Ultraflex

Availability: In stock
SKU: SSBO13730
Price: $219.40 ($0.50 / SQ. FT.)
Earn 220 points

SuperSmooth™ Blockout is a 15 oz. smooth, scrimless, blockout banner material best suited for double sided signs and banners, compatible with UV, solvent or screen-printing. Engineered primarily for indoor use, SuperSmooth Blockout may be used outdoors for very short durations. With its low curl formula lay-flat appearance, SuperSmooth Blockout is ideal for pop-up or scrolling banner stands, tradeshow and events graphics, POP and any hanging banner or sign.

Technical Specifications

Product Type Inkjet Printable Media
Paper Weight 510 gsm
Applications - Media Banners
Ink Type Solvent
Eco-Solvent
UV Curable
Media Opacity Opaque
Media Type Banner
Vinyl: Banner
Core Size 3 in
Width 54 in
Length 98 ft
Units 1 Roll
Edge Loyalty Points Multiplier 1x Edge Points
Double Sided No
Durability Indoor
Properties Description
Material Polyester
Total Weight 510g or 15 oz/sq. yd.
Tensile Strength 266/264 (lbs/inch)
Tear Strength Weft 5.8, Warp 7.8
Low Temperature Resistance -20° C or -24° F (Short term outdoor application only)
Fungus Resistant Treated ASTM G21
RF Weldable (Heat Sealable) Yes
Grommeting Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Tape & Stitched Hem Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape.
Finishing/Post Process Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal.

Customer Reviews


  • Only registered users can write reviews

Review Breakdown 0 review(s)

5
0%
4
0%
3
0%
2
0%
1
0%