SuperSmooth(tm) Blockout is a 15 oz. smooth, scrimless, blockout banner material best suited for double sided signs and banners, compatible with UV, solvent o ... Read More
Banner, Vinyl: Banner Media
Compatible with Solvent, Eco-Solvent, UV Curable Printers
SuperSmooth™ Blockout is a 15 oz. smooth, scrimless, blockout banner material best suited for double sided signs and banners, compatible with UV, solvent or screen-printing. Engineered primarily for indoor use, SuperSmooth Blockout may be used outdoors for very short durations. With its low curl formula lay-flat appearance, SuperSmooth Blockout is ideal for pop-up or scrolling banner stands, tradeshow and events graphics, POP and any hanging banner or sign.
| Product Type | Inkjet Printable Media |
| Paper Weight | 510 gsm |
| Applications - Media | Banners |
| Ink Type | Solvent |
| Eco-Solvent | |
| UV Curable | |
| Media Opacity | Opaque |
| Media Type | Banner |
| Vinyl: Banner |
| Properties | Description |
| Material | Polyester |
| Total Weight | 510g or 15 oz/sq. yd. |
| Tensile Strength | 266/264 (lbs/inch) |
| Tear Strength | Weft 5.8, Warp 7.8 |
| Low Temperature Resistance | -20° C or -24° F (Short term outdoor application only) |
| Fungus Resistant | Treated ASTM G21 |
| RF Weldable (Heat Sealable) | Yes |
| Grommeting | Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability. |
| Tape & Stitched Hem | Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape. |
| Finishing/Post Process | Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal. |
54 in x 98 ft - 1 Roll (3 in Core) 
Earn 220 points
63 in x 98 ft - 1 Roll (3 in Core)
Earn 288 points
38 in x 98 ft - 1 Roll (3 in Core)
Earn 142 points
86 in x 98 ft - 1 Roll (3 in Core)
