Picture of Ultraflex SuperPrint® Plus FL Matte, 13 oz - 54in x 164ft

Ultraflex SuperPrint® Plus FL Matte, 13 oz - 54in x 164ft

Ultraflex SuperPrint(r) Plus FL (formerly named JetFlex Plus FL) is a 13 oz. front-lit banner or billboard material for UV, solvent, eco-solvent, latex or screen-printing. ... Read More

Brand: Ultraflex

Availability: In stock
SKU: JFM137050
Price: $220.00 ($0.30 / SQ. FT.)
Earn 220 points

Ultraflex SuperPrint® Plus FL is a 13 oz. front-lit banner or billboard material for UV, solvent, eco-solvent, latex or screen-printing. It has a smooth front-side finish for picture perfect imaging, high bonding strength, stable ink absorption, high tear/tensile strength, an enhanced backside surface for better movement across the print platen and an improved white point.

Technical Specifications

Product Type Inkjet Printable Media
Paper Weight 440 gsm
Applications - Media Billboards
Banners
Finish Matte
Ink Type Solvent
Latex
Eco-Solvent
UV Curable
Media Type Vinyl: Banner
Banner
Core Size 3 in
Width 54 in
Length 164 ft
Units 1 Roll
Finish Matte
Edge Loyalty Points Multiplier 1x Edge Points
Double Sided No
Properties Description
Material Polyester
Total Weight 440g or 13 oz/sq. yd.
Tensile Strength 302/256 (lbs/inch)
Tear Strength Weft 38, Warp 42
Low Temperature Resistance -30° C or -22° F
Grommeting Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Tape & Stitched Hem Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape.
Finishing/Post Process Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal.

Customer Reviews


  • Only registered users can write reviews

Review Breakdown 0 review(s)

5
0%
4
0%
3
0%
2
0%
1
0%