Ultraflex SuperPrint® Plus FL is a 13 oz. front-lit billboard and banner material designed to be the economical alternative to Normandy® Pro and JetFlex®. It is compatible with solvent, eco-solvent, UV and screen printing. The face-film provides exceptional ink receptivity and consistently prints from batch to batch. SuperPrint® Plus is available in matte and gloss finishes and is available in widths from 38” – 196”. The material also comes in 492’ rolls specifically engineered for HP Turbojet and screen-printing machines. The rolls are available in 38”, 54”, 63” widths and are wound face-out on a 3” core. ... Read More
Vinyl: Banner, Banner Media
Compatible with Solvent, Latex, Eco-Solvent, UV Curable Printers
Ultraflex SuperPrint® Plus FL is a 13 oz. front-lit banner or billboard material for UV, solvent, eco-solvent, latex or screen-printing. It has a smooth front-side finish for picture perfect imaging, high bonding strength, stable ink absorption, high tear/tensile strength, an enhanced backside surface for better movement across the print platen and an improved white point.
| Product Type | Inkjet Printable Media |
| Paper Weight | 440 gsm |
| Applications - Media | Billboards |
| Banners | |
| Finish | Matte |
| Ink Type | Solvent |
| Latex | |
| Eco-Solvent | |
| UV Curable | |
| Media Type | Vinyl: Banner |
| Banner |
| Properties | Description |
| Material | Polyester |
| Total Weight | 440g or 13 oz/sq. yd. |
| Tensile Strength | 302/256 (lbs/inch) |
| Tear Strength | Weft 38, Warp 42 |
| Low Temperature Resistance | -30° C or -22° F |
| Grommeting | Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability. |
| Tape & Stitched Hem | Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape. |
| Finishing/Post Process | Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal. |
72 in x 164 ft - 1 Roll (3 in Core) 
Earn 292 points
54 in x 164 ft - 1 Roll (3 in Core) - Matte
Earn 220 points
38 in x 164 ft - 1 Roll (3 in Core) - Matte
Earn 157 points
63 in x 164 ft - 1 Roll (3 in Core)
Earn 251 points
102 in x 164 ft - 1 Roll (3 in Core)
Earn 456 points
98 in x 164 ft - 1 Roll (3 in Core)
Earn 445 points
126 in x 164 ft - 1 Roll (3 in Core)
Earn 520 points
54 in x 750 ft - 1 Roll (3 in Core) - Matte
Earn 781 points
63 in x 750 ft - 1 Roll (3 in Core) - Matte
Earn 752 points
150 in x 164 ft - 1 Roll (3 in Core) - Matte
Earn 689 points
