Picture of Ultraflex Normandy® Pro FL, 13oz Matte  - 102in x 164ft

Ultraflex Normandy® Pro FL, 13oz Matte - 102in x 164ft

Normandy® Pro FL is a premium 13 oz. banner or billboard material. ... Read More

Brand: Ultraflex

Price: $449.67 ($0.32 / SQ. FT.)
Earn 450 points
Check Availability

Compatible with latex, solvent, eco-solvent and UV inks. The Normandy® brand is recommended by printer manufacturers and preferred by high end, wide format printing facilities. This product has a 1000 x 1000 high tenacity yarn construction that makes it one of the strongest 13 oz. billboard substrates on the market. It has a unique face-film which produces vibrant and consistent prints. 

Normandy® Pro FL is tear and fade resistant, strong, durable and prints vibrantly and consistently. Available in both matte and gloss finishes. 

HP Latex Certified Media

Technical Specifications

Product Type Inkjet Printable Media
Ink Type Eco-Solvent
UV Curable
Media Type Banner
Thickness 13 mil
Color Matte
Width 102 in
Length 164 ft
Core Size 3 in
Edge Loyalty Points Multiplier 1x Edge Points
Properties Description
Material Polyester
Total Weight 440g or 13 oz/sq. yd.
Tensile Strength 333/281 (lbs/inch)
Tear Strength Weft 21, Warp 39
Low Temperature Resistance -40° C (-40° F)
Fungus Resistant Treated
Flame Resistance NFPA701, CA Fire Marshall, NYC (MEA)
Grommeting Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Tape & Stitched Hem Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape.
Finishing/Post Process Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal.

Customer Reviews

  • Only registered users can write reviews

Review Breakdown 0 review(s)