Ultraflex Normandy® Pro FL, 13oz

Normandy® Pro FL is a premium 13 oz. banner or billboard material. ... Read More

Banner Media
Compatible with Eco-Solvent, UV Curable, Solvent, Latex Printers

Brand: Ultraflex

Compatible with latex, solvent, eco-solvent and UV inks. The Normandy® brand is recommended by printer manufacturers and preferred by high end, wide format printing facilities. This product has a 1000 x 1000 high tenacity yarn construction that makes it one of the strongest 13 oz. billboard substrates on the market. It has a unique face-film which produces vibrant and consistent prints.

Normandy® Pro FL is tear and fade resistant, strong, durable and prints vibrantly and consistently. Available in both matte and gloss finishes.

HP Latex Certified Media

Technical Specifications

Product Type	Inkjet Printable Media
Ink Type	Eco-Solvent
	UV Curable
	Solvent
	Latex
Media Type	Banner
Thickness	13 mil

Properties	Description
Material	Polyester
Total Weight	440g or 13 oz/sq. yd.
Tensile Strength	333/281 (lbs/inch)
Tear Strength	Weft 21, Warp 39
Low Temperature Resistance	-40° C (-40° F)
Fungus Resistant	Treated
Flame Resistance	NFPA701, CA Fire Marshall, NYC (MEA)
Grommeting	Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Tape & Stitched Hem	Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape.
Finishing/Post Process	Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal.