Ultraflex JetFlex FL Matte FO

Ultraflex JetFlex(r) FL Matte (Face Out) is a 13 oz. quality, economical choice for an all around outstanding front-lit banner or billboard material for U ... Read More

Vinyl: Banner, Banner Media
Compatible with Solvent, Eco-Solvent, UV Curable Printers

Be the first to review this product

Brand: Ultraflex

Overview
Reviews

Ultraflex JetFlex® Plus FL Matte (Face Out) is a 13 oz. quality, economical choice for an all around outstanding front-lit banner or billboard material for UV, solvent, latex or screen-printing. Both strong and durable, JetFlex FL prints vibrantly and consistently and is tear and fade resistant.

Ultraflex Normandy® Pro FL (13 oz), the wider version of this banner, is available by calling your LexJet Sales Specialist at 800-453-9538.

Technical Specifications

Product Type	Inkjet Printable Media
Applications - Media	Banners
	Billboards
Finish	Matte
Ink Type	Solvent
	Eco-Solvent
	UV Curable
Media Type	Vinyl: Banner
	Banner

Properties	Description
Material	Polyester
Total Weight	440g or 13 oz/sq. yd.
Tensile Strength	302/256 (lbs/inch)
Tear Strength	Weft 38, Warp 42
Low Temperature Resistance	-30° C or -22° F
Flame Resistance	NFPA701
Grommeting	Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Tape & Stitched Hem	Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape.
Finishing/Post Process	Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal.