1. /
  2. /
  3. /
  4. /
  5. /
  6. Ultraflex JetFlex® FL Matte Face-Out, 13oz - 54in x 115ft
Picture of Ultraflex JetFlex® FL Matte Face-Out, 13oz - 54in x 115ft

Ultraflex JetFlex® FL Matte Face-Out, 13oz - 54in x 115ft

Ultraflex JetFlex® FL Matte (Face Out) is a 13 oz. quality, economical choice for an all around outstanding front-lit banner or billboard material for U ... Read More

54 in x 115 ft - 1 Roll (3 in Core)

Be the first to review this product
Brand: Ultraflex
SKU: PPMFL13735FO
Call for pricing
Check Availability

Ultraflex JetFlex® Plus FL Matte (Face Out) is a 13 oz. quality, economical choice for an all around outstanding front-lit banner or billboard material for UV, solvent, latex or screen-printing. Both strong and durable, JetFlex FL prints vibrantly and consistently and is tear and fade resistant.

Ultraflex Normandy® Pro FL (13 oz), the wider version of this banner, is available by calling your LexJet Sales Specialist at 800-453-9538.

Technical Specifications

Product Type Inkjet Printable Media
Applications - Media Banners
Billboards
Finish Matte
Ink Type Solvent
Eco-Solvent
UV Curable
Media Type Vinyl: Banner
Banner
Core Size 3 in
Width 54 in
Length 115 ft
Units 1 Roll
Edge Loyalty Points Multiplier 1x Edge Points
Double Sided No
Properties Description
Material Polyester
Total Weight 440g or 13 oz/sq. yd.
Tensile Strength 302/256 (lbs/inch)
Tear Strength Weft 38, Warp 42
Low Temperature Resistance -30° C or -22° F
Flame Resistance NFPA701
Grommeting Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Tape & Stitched Hem Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape.
Finishing/Post Process Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal.

Customer Reviews

Be the first to review this product

  • Only registered users can write reviews

Review Breakdown 0 review(s)

5
0%
4
0%
3
0%
2
0%
1
0%
Copyright © 2024 LexJet - Inkjet Printers, Media, Ink Cartridges and More. All rights reserved.