Ultraflex JetFlex® FL Matte, 13oz - 72in x 164ft

JetFlex® FL Matte is a 13 oz. quality, economical choice for an all around outstanding front-lit banner or billboard material for UV, solvent, latex or scre ... Read More

72 in x 164 ft - 1 Roll (3 in Core)
Compatible with Solvent, Latex, Eco-Solvent, UV Curable Printers

Be the first to review this product

Brand: Ultraflex

SKU: PPMFL18350

Call for pricing

Check Availability

Overview
Reviews

JetFlex® FL Matte is a 13 oz. quality, economical choice for an all around outstanding front-lit banner or billboard material for UV, solvent, latex or screen-printing. Both strong and durable, JetFlex FL prints vibrantly and consistently and is tear and fade resistant.

Technical Specifications

Product Type	Inkjet Printable Media
Paper Weight	440 gsm
Applications - Media	Banners
Finish	Matte
Ink Type	Solvent
	Latex
	Eco-Solvent
	UV Curable
Media Type	Vinyl: Banner
	Banner
Core Size	3 in
Width	72 in
Length	164 ft
Units	1 Roll
Edge Loyalty Points Multiplier	1x Edge Points
Double Sided	No
Durability	Water Resistant
	Indoor
	Outdoor
Ink Type	Solvent
	Latex
	Eco-Solvent
	UV Curable

Properties	Description
Material	Polyester
Total Weight	440 g/m2 or 13 oz/yd2
Tensile Strength	333/281 (lbs/inch)
Tear Strength	Weft 21, Warp 39
Temperature Resistance	-40 to 70° C or -40 to 158° F
Fungus Resistant	Yes; ASTM G21
Flame Resistance	Class A flame rating. NFPA701, CA Fire Marshall, NYC (MEA). Test method DIN 4102
Grommeting	Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Tape & Stitched Hem	Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape.
Finishing/Post Process	Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal.

Customer Reviews

Be the first to review this product

Only registered users can write reviews

Ultraflex JetFlex® FL Matte, 13oz - 72in x 164ft

Technical Specifications

Customer Reviews

Review Breakdown 0 review(s)

Follow us

Newsletter