Ultraflex JetFlex® FL Gloss Face-Out is a 13 oz. quality, economical choice for an all around outstanding front-lit banner or billboard material for ... Read More
Vinyl: Banner, Banner Media
Compatible with Solvent, Eco-Solvent, UV Curable Printers
Ultraflex JetFlex® Plus FL Gloss (Face Out) is a 13 oz. quality, economical choice for an all around outstanding front-lit banner or billboard material for UV, solvent, latex or screen-printing. Both strong and durable, JetFlex FL prints vibrantly and consistently and is tear and fade resistant.
| Product Type | Inkjet Printable Media |
| Applications - Media | Billboards |
| Banners | |
| Finish | Gloss |
| Ink Type | Solvent |
| Eco-Solvent | |
| UV Curable | |
| Media Type | Vinyl: Banner |
| Banner |
| Properties | Description |
| Material | Polyester |
| Total Weight | 440g or 13 oz/sq. yd. |
| Tensile Strength | 302/256 (lbs/inch) |
| Tear Strength | Weft 38, Warp 42 |
| Low Temperature Resistance | -30° C or -22° F |
| Flame Resistance | NFPA701 |
| Grommeting | Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability. |
| Tape & Stitched Hem | Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape. |
| Finishing/Post Process | Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal. |
38 in x 115 ft - 1 Roll (3 in Core) - Gloss 
54 in x 115 ft - 1 Roll (3 in Core) - Gloss
63 in x 115 ft - 1 Roll (3 in Core) - Gloss
