JetFlex® FL is a premium 13 oz. front-lit banner material. It is compatible with solvent, eco-solvent, UV and Latex inks. Made with the same face-film as Normandy® Pro, JetFlex® prints vibrantly and consistently from batch to batch. Its 1000 x 1000 high tenacity polyester yarn give it strength and superior print quality making it the preferred 13 oz. banner material among print manufacturers and industry-leading printing facilities. JetFlex® is available in matte and gloss finishes in widths ranging from 30” – 80”. In widths of 98” and above, this product is called Normandy® Pro FL. ... Read More
Vinyl: Banner, Banner Media
Compatible with Solvent, Latex, UV Curable, Eco-Solvent Printers
JetFlex® FL Gloss is a 13 oz. quality, economical choice for an all around outstanding front-lit banner or billboard material for UV, solvent, latex or screen-printing. Both strong and durable, JetFlex FL prints vibrantly and consistently and is tear and fade resistant. In widths 98” and above, this product is called Normandy® Pro FL
Product Type | Inkjet Printable Media |
Applications - Media | Banners |
Finish | Gloss |
Ink Type | Solvent |
Latex | |
UV Curable | |
Eco-Solvent | |
Media Type | Vinyl: Banner |
Banner |
Properties | Description |
Material | Vinyl |
Total Weight | 440g or 13 oz/sq. yd. |
Tensile Strength | 333/281 (lbs/inch) |
Tear Strength | Weft 21, Warp 39 |
Low Temperature Resistance | -4 to 70° C or -23 to 158° F |
Fungus Resistant | Yes; ASTM G21 |
Flame Resistance | Class A flame rating. NFPA701, CA Fire Marshall, NYC (MEA). Test method DIN 4102 |
Grommeting | Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability. |
Tape & Stitched Hem | Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape. |
Finishing/Post Process | Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal. |
72 in x 164 ft - 1 Roll (3 in Core)
63 in x 164 ft - 1 Roll (3 in Core)
38 in x 164 ft - 1 Roll (3 in Core)
54 in x 164 ft - 1 Roll (3 in Core)
80 in x 164 ft - 1 Roll (3 in Core)
30 in x 164 ft - Gloss