Picture of Ultraflex DSS Blockout (15 oz) 38in x 164ft

Ultraflex DSS Blockout (15 oz) 38in x 164ft

DSS 15oz. is a blockout banner material with a uniquely constructed dual print surface. DSS 15oz. is engineered for high resolution, two-sided printing. Itisideal for any indoor application where opacity is required. DSS 15oz. works with solvent, eco-solvent, UV, screenprinting and Latex inks. Available in widths from 54”–126”. ... Read More

Brand: Ultraflex

SKU: DSS150965050
PART: DSS15137050
Price: $228.00 ($0.44 / SQ. FT.)
Earn 228 points
Check Availability

DSS 15oz. is a blockout banner material with a uniquely constructed dual print surface. DSS 15oz. is engineered for high resolution, two-sided printing. Itisideal for any indoor application where opacity is required. DSS 15oz. works with solvent, eco-solvent, UV, screenprinting and Latex inks.  Available in widths from 54”–126”.

Technical Specifications

Product Type Inkjet Printable Media
Paper Weight 500 gsm
Applications - Media Banners
Ink Type Solvent
Latex
Eco-Solvent
UV Curable
Media Opacity Opaque
Media Type Banner
Vinyl: Banner
Core Size 3 in
Width 38 in
Length 164 ft
Units 1 Roll
Edge Loyalty Points Multiplier 1x Edge Points
Double Sided Yes
Durability Water Resistant
Indoor
Outdoor
Ink Type Solvent
Eco-Solvent
Latex
UV Curable
Properties Description
Material Polyester
Total Weight 500 g/m2 or 15 oz/yd2
Tensile Strength 114/105 (lbs/inch)
Tear Strength Weft 4.4, Warp 6.6
Temperature Resistance -40 to 70° C or -40 to 158° F
Fungus Resistant Yes. ASTM G21
Flame Resistance Class A flame rating. Test Method DIN 4102 B1. NFPA701, Title 19, CSFM, B1
Grommeting Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Tape & Stitched Hem Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape.
Finishing/Post Process Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal.

Customer Reviews


  • Only registered users can write reviews

Review Breakdown 0 review(s)

5
0%
4
0%
3
0%
2
0%
1
0%
Technical Specifications