LexJet TOUGHcoat(tm) AquaVinyl(tm) PSA is a 5-mil adhesive-backed vinyl with a white point that enables bright, colorful photos to be printed on a durable, we ... Read More
Adhesive Backed, Vinyl: Calendered, Vinyl Media
Compatible with Aqueous Printers
LexJet TOUGHcoat™ AquaVinyl™ PSA is a 5-mil adhesive-backed vinyl with a white point that enables bright, colorful photos to be printed on a durable, weather-resistant surface.
The TOUGHcoat™ layer provides such exceptional resistance to water and scratching that graphics printed on this material will last up to 8 months outdoors without lamination. Prints will last up to two years outdoors when laminated with LexJet Elite Matte UV or Elite Luster UV laminates.
The super smooth, bright-white surface and superior ink-saturation properties of this material provide deep rich colors and the expanded gamut needed to produce great-looking photos or graphics with hard-to-hit spot colors.
The strong, permanent solvent-based adhesive sticks to most popular sign substrates and removes cleanly for up to 90 days.
LexJet TOUGHTcoat™ AquaVinyl™ PSA is compatible with all aqueous inkjet printers, whether they use dye or pigment inks or thermal or piezo printheads.
|Product Type||Inkjet Printable Media|
|Paper Weight||320 gsm|
|Applications - Media||POP/ Indoor Signage|
|Temporary Outdoor Signage|
|Media Type||Adhesive Backed|
|Material||Matte Calendared vinyl|
|Gauge of Adhesive||1 mil|
|Release Liner||6 mil|
|Total Gauge||12 mil|
|Total Weight||320 gsm|
|Adhesive||Permanent solvent-based acrylic|
|Gloss Level at 60°||2.1|
|Peel Force||7.0 N/in. to stainless steel|
|Light Fastness||The fading time of ink jet ink is a direct result of the inks you choose to use, as well as the environment where the print is displayed. All dye-based inks fade noticeably under direct sunlight, in interior applications where direct sunlight may fall on the image, and/or where fluorescent or other UV lighting is present. Although the fading process is inherent in all ink jet inks, certain UV enhanced inks, pigment-based inks, and UV inhibiting laminates will extend the longevity of ink color. Contact the ink manufacturer to determine a specific ink's suitability for a particular application.|
|Software Settings||When using this material with pigment-based inks, utilize the UCR (Under Color Removal) technique that replaces composite black (CMY) with the appropriate amount of black ink. To optimize print quality, printers should be set for the highest print quality, and media selection should be "adhesive vinyl". Ink coverage up to 350% is recommended.|
|Water Resistance and Surface Protection||To obtain a high degree of water resistance, use only pigmented ink. Allow the print to dry for 24 hours before exposing it to moisture. Lamination is not required. Ink saturation over 350% can affect the water fast properties and show ink bleed. Dye-based inks will yield good color gamut, but bleeding may occur when the images get wet. Over-laminating dye-based ink will not eliminate image bleed, unless the material is completely sealed to a non-porous surface. Dirt and stains cannot be cleaned from the imaged surface and the surface can be damaged from excessive folding or creasing.|
|Optimal Service Environment||For printing: 60° - 80° F, 50% Relative Humidity.|
|Minimum Application Temp.||40° F|
|Ideal Storage Conditions||70° F (21° C), 50% R.H. (a controlled environment is recommended); store in original packaging.|
|Shelf Life||1 year from the LexJet ship date when stored in proper conditions.|
|Health & Safety||WARNING: This product contains a chemical known to the State of California to cause cancer.|
24 in x 60 ft - 1 Roll (2 in Core) -
42 in x 60 ft - 1 Roll (2 in Core) -
50 in x 60 ft - 1 Roll (2 in Core) -
60 in x 60 ft - 1 Roll (2 in Core) -
36 in x 60 ft - 1 Roll (2 in Core) -