Shippers are at peak capacity and holiday shipping could impact transit times. Shippers have already eliminated transit guarantees and we encourage you to plan accordingly. If you have any questions or if we can help, please give us a call at 800-453-9538.
Picture of LexJet Simple Translucent Vinyl (6 Mil)- 54in x 150ft

LexJet Simple Translucent Vinyl (6 Mil)- 54in x 150ft

LexJet's Simple Translucent Vinyl is a 6-mil premium translucent vinyl with uniform light-diffusion properties needed to produce vibrant outdoor backlit graph ... Read More

Brand: LexJet

SKU: STVR654150
UPC: 848412005011
Price: $421.78 ($0.62 / SQ. FT.)
Earn 422 points

LexJet's Simple Translucent Vinyl is a 6-mil premium translucent vinyl with uniform light-diffusion properties needed to produce vibrant outdoor backlit graphics including retail signage, taxi tops, bus displays, and menu boards. The adhesive bonds well to a wide variety of substrates, yet removes cleanly for up to one year. The 6-mil thickness helps make graphics easier to install and remove. The vinyl works well on a wide variety of printers that use solvent, low-solvent, and UV-curable inks.


Technical Specifications

Product Type Inkjet Printable Media
Thickness 6 mil
Applications - Media Backlit
Finish Matte
Ink Type Solvent
UV Curable
Media Opacity Translucent
Media Type Vinyl: Calendered
Adhesive Backed
Core Size 3 in
Width 54 in
Length 150 ft
Units 1 Roll
Edge Loyalty Points Multiplier 1x Edge Points
Double Sided No
Properties Description
Material Calendared PVC
Finish Matte
Gauge 6 mil
Gauge of Adhesive .8 to 1.1 mil removable solvent acrylic adhesive
Release Liner 6.7 mil, 90# lay flat liner
Total Gauge 14 mil
180° Peel Adhesion 16 oz/in. to stainless steel
Printer/Ink Compatibility Compatible all inkjet printers using eco solvent, solvent, latex and UV-curable ink.
Software Settings Printer settings will vary between printer manufacturers. Recommended heater settings: Pre-heat 40-45° C, platen 45-50° C and post-heat 50° C have been found as a good place to start.
Color Matching For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software.
Finishing/Post Processing Before finishing, trimming and installing the graphic, allow the image to completely evaporate and dry for a minimum of 24 hours to ensure the solvents are gone from the print. Failure to do so may facilitate solvent penetration resulting in vinyl degradation.
Light Fastness The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data.
Removability/Expected Life Removable for up to one year under normal exposure conditions from most common substrates.
Optimal Print Environment 70° F (21° C), 50% R.H
Service Temp. Range -40° to 176° F (-40° C to 80° C).
Minimum Application Temp. 40° F
Shipping Instructions Always roll graphics with the thinnest material facing out. When both materials are the same thickness, always roll them in the same way every time. LexJet recommends rolling the graphic with a minimum 12 inch diameter.
Ideal Storage Conditions 70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging.
Shelf Life 1 year from the LexJet ship date when stored in proper conditions.

Customer Reviews

  • Only registered users can write reviews

Review Breakdown 0 review(s)