LexJet's Simple Perforated Window Vinyl (70/30) is a 6-mil perforated vinyl for producing see-through window graphics that can attract attention and generate ... Read More
Adhesive Backed Media
Compatible with Solvent, Latex, Eco-Solvent, UV Curable Printers
LexJet's Simple Perforated Window Vinyl (70/30) is a 6-mil perforated vinyl for producing see-through window graphics that can attract attention and generate increased store traffic. The 70% printable area, 30% open area pattern, and 1.5 mm hole size is an ideal combination for producing eye-catching prints that do not obstruct visibility through the window. The two-layer perforated liner allows trouble-free printing for shops with UV curable printers. For added protection and undiminished clarity, laminate with LexJet’s Optically Clear Cast Laminate or LexJet Gloss Polyester Laminate (2 Mil). LexJet’s Simple Perforated Window Vinyl works well on a wide variety of printers that use solvent, low-solvent, UV-curable and latex inks.
Features:
Product Type | Inkjet Printable Media |
Thickness | 6 mil |
Applications - Media | Window Graphics |
Featured | |
Ink Type | Solvent |
Latex | |
Eco-Solvent | |
UV Curable | |
Media Type | Adhesive Backed |
Properties | Description |
Material | Calendared PVC |
Finish | Matte |
Gauge | 6 Mil |
Perforation Pattern | 70/30; 1.5 mm hole size |
Adhesive | .8 to 1.1 mil clear removable acrylic pressure sensitive adhesive |
Release Liner | 9 Mil lay-flat dual layer perforated release liner |
Printer/Ink Compatibility | Compatible all inkjet printers using eco solvent, solvent, latex and UV-curable ink. |
Software Settings | Printer settings will vary between printer manufacturers. Recommended heater settings: Pre-heat 45° C, platen 50° C and post-heat 50° C have been found as a good place to start. |
Finishing/Post Processing | Pressure-sensitive vinyl laminates like LexJet Optically Clear Cast Laminate or LexJet Gloss Polyester Laminate (2 Mil) can be applied to increase the fade and abrasion resistance of the image. Before applying the laminate, allow the image to dry for 24 hours. Residual solvent trapped beneath a laminate as a result of insufficient dry time can cause color shifts. |
Light Fastness | The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data. |
Removability/Expected Life | Removable for up to one year under normal exposure conditions from most common substrates. Beyond one year, the adhesive becomes more difficult to remove. Recommend testing for specific usage. |
Optimal Print Environment | 70° F (21° C), 50% R.H |
Application and Cleaning | Windows must be clean to assure adequate product bond. Do not use solvent or ammonia based glass cleaners for cleaning. |
Service Temp. Range | 0° - 150° F |
Minimum Application Temp. | 60° F |
Shipping Instructions | Always roll graphics with the thinnest material facing out. When both materials are the same thickness, always roll them in the same way every time. LexJet recommends rolling the graphic with a minimum 12 inch diameter. |
Ideal Storage Conditions | 70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging. |
Shelf Life | 1 year from the LexJet ship date when stored in proper conditions. |
60 in x 100 ft - 1 Roll (3 in Core)
54 in x 100 ft - 1 Roll (3 in Core)