Properties |
Description |
Material |
Ultra-conformable Calendared PVC (Gloss) |
Gauge |
2.4 mil |
Adhesive |
.8 to 1.1 mil Gray repositionable solvent acrylic |
Release Liner |
90# air egress liner |
Total Gauge |
3.3 mil |
180° Peel Adhesion |
40 oz/in. to stainless steel |
Printer/Ink Compatibility |
Compatible all inkjet printers using eco solvent, solvent, latex and UV-curable ink. |
Software Settings |
Printer settings will vary between printer manufacturers. Recommended heater settings: Pre-heat 30° C, platen 33° C and post-heat 35° C have been found as a good place to start. |
Color Matching |
For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software. However, if these tools are not available use one of the onboard media settings for cast vinyl. |
Finishing/Post Processing |
For wrap applications, partner with LexJet Simple Flo Wrap Gloss UV Laminate (2.4 mil). Before finishing, trimming and installing the graphic, allow the image to completely evaporate and dry for a minimum of 24 hours to ensure the solvents are gone from the print. Failure to do so may facilitate solvent penetration, resulting in vinyl degradation. Application surface should always be cleaned, tested and checked for defects before applying the LexJet Simple Flo Wrap Vinyl solution. This product can be installed using the wet application method.
|
Light Fastness |
The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data. |
Removability/Expected Life |
Removable for up to one year under normal exposure conditions from most common substrates. Beyond one year, the adhesive becomes permanent and durable up to seven years. Recommend testing for specific usage. |
Optimal Print Environment |
70° F (21° C), 50% R.H |
Service Temp. Range |
-40° - 176° F (-40° C to 80° C). |
Minimum Application Temp. |
40° F |
Shipping Instructions |
Always roll graphics with the thinnest material facing out. When both materials are the same thickness, always roll them in the same way every time. LexJet recommends rolling the graphic with a minimum 12 inch diameter. |
Ideal Storage Conditions |
70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging. |
Shelf Life |
1 year from the LexJet ship date when stored in proper conditions. |