4.7 mil, water-resistant, silver polyester film with a high gloss coating for a mirror finish. Clear antistatic back-coat avoids attracting dust and slipping in the printer. ... Read More
Polyester Film Media
Compatible with Solvent, Eco-Solvent, Latex, UV Curable Printers
KernowJet RefleKtion 119 has a high-gloss silver metallic finish on both sides. The water-resistant coating on the front-face is printable with Solvent, Latex and UV cured inks, while the rear side is only printable with UV inks. Used as a hanging display film, it will perform like a mirror film. RefleKtion 119 can also be used for shop decoration items, for example when pre-scored and folded. When printed, the use of white inks is highly recommended to maximise display impact. The anti-static coating avoids printing issues and attracting dust once installed.
Post Printing Information for Latex & Solvent Inks: As with all filmic media, this product must be allowed to “gas-out” after printing. This can be achieved by leaving the prints face up, ideally 24 hours, to set and harden the unique scratch resistant properties. If unable to do this e.g. with a long print run, after printing the roll stand it vertically and loosely unwind as much as possible, to allow air in and gases out.
|Product Type||Inkjet Printable Media|
|Core Size||3 in|
|POP / Indoor Signage|
|Media Type||Polyester Film|
50 in x 100 ft - 1 Roll (3 in Core) - Metallic Silver
Compatible with Solvent, Eco-Solvent, UV Curable, Latex Printers