Picture of Photo Tex PSA Fabric - Solvent 54in x 20ft

Photo Tex PSA Fabric - Solvent 54in x 20ft

Photo Tex adhesive-back fabric sticks to any non-porous flat surface and is easy to install, creating brilliant, seamless images with dynamic, vivid colors. P ... Read More

Brand: Photo Tex

Availability: In stock
SKU: PT5420S
Price: $125.00 ($1.39 / SQ. FT.)
Earn 125 points

Wall Mural Banner


Photo Tex adhesive-back fabric sticks to any non-porous flat surface and is easy to install, creating brilliant, seamless images with dynamic, vivid colors. Photo Tex works indoors or out, so the sharp graphics will not shrink, wrinkle or rip in any temperature or climate change. It is ideal for walls and wall murals in restaurants, retail settings, offices, vehicles, and more. Photo Tex will easily wrap around corners, poles, and even ceilings, and it is removable, reusable, and repositionable and won’t leave any residue behind. Other application ideas for this versatile fabric include windows, doors, sign boards, elevators, and more. This version of Photo Tex is compatible with low-solvent, solvent, and UV curable printers.

View the video below to see Photo Tex in action:

Technical Specifications

Product Type Inkjet Printable Media
Thickness 6 mil
Applications - Media Outdoor Décor
Interior Décor
Trade Show Graphics
Vehicle Graphics
Wall Murals
Window Graphics
Outdoor Signage
POP/ Indoor Signage
Soft Signage
Floor Graphics
Finish Matte
Ink Type Solvent
UV Curable
Media Opacity Translucent
Media Type Adhesive Backed
Core Size 3 in
Width 54 in
Length 20 ft
Units 1 Roll
Edge Loyalty Points Multiplier 1x Edge Points
Double Sided No
Properties Description
Material 40-45% polyester, 40-45% pulp-cellulose
Gauge 6 mil
Adhesive Low tack removable and repositionable adhesive
Release Liner 4 mil
Total Gauge 10 mil
Printer/Ink Compatibility Compatible all inkjet printers using eco solvent, solvent, latex and UV-curable ink.
Software Settings Printer settings will vary between printer manufacturers. To optimize print quality, 720 dpi will offer the best results. Recommended heater settings of 40-50° C, for both pre and post-heaters. These recommendations have been found to be a good place to start.
Color Matching For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software. The "PSA Vinyl" setting in most RIPs is appropriate when custom profiles are not possible.
Finishing/Post Processing Use a carbide knife for kiss and die cutting. For additional protection, liquid or spray coatings are recommended.
Light Fastness The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data.
Surface Preparation The non-porous flat surface should be cleaned and free of dust and debris.
Optimal Print Environment 59-77° F, 20-80% R.H
Service Temp. Range For end use: 0- 176° F
Handling Recommendations Due to the absorptive nature of the coating, you should avoid touching the coated surface of the film. To install the graphic, peel 4 inches of the liner off the graphic and place on wall. Continue to peel back 4 inches of the liner incrementally while mounting.
Ideal Storage Conditions 50-80° F, 20-80% R.H. (a controlled environment is recommended); store vertically in original packaging.
Shelf Life 1 year from the LexJet ship date when stored in proper conditions.
Special Instructions A liquid laminate must be applied for outdoor use. Wait a minimum of 24 hours, after printing, to apply the liquid laminate. Leave the release liner on Photo Tex during the liquid laminating process. After lamination, wait an additional 24 hours prior to installation.
ACT Compliance Photo Tex has been tested and is ACT compliant for Lead and Phthalate. It meets requirements for CPSC 16 CFR 1303, H.R. 4040 CPSIA 2008 Section 101 and H.R. 4040 CPSIA 2008 Section 108.
Environmental and Toxicity Notes PhotoTex has no detrimental concerns of Phthalates, no PVC, no Glycol-ether and no Formaldehyde.

Customer Reviews

  • Only registered users can write reviews

Review Breakdown 0 review(s)