Photo Tex adhesive-back fabric sticks to any non-porous flat surface and is easy to install, creating brilliant, seamless images with dynamic, vivid colors. Photo Tex works indoors or out, so the sharp graphics will not shrink, wrinkle or rip in any temperature or climate change. It is ideal for walls and wall murals in restaurants, retail settings, offices, vehicles, and more. Photo Tex will easily wrap around corners, poles, and even ceilings, and it is removable, reusable, and repositionable and won’t leave any residue behind. Other application ideas for this versatile fabric include windows, doors, sign boards, elevators, and more. Photo Tex is compatible with aqueous inkjet and HP Latex printers.
View the video below to see Photo Tex in action:
| Product Type | Inkjet Printable Media |
| Thickness | 12 mil |
| Applications - Media | Featured |
| Wall Murals | |
| Window Graphics | |
| Interior Décor | |
| Photographs | |
| POP/ Indoor Signage | |
| Soft Signage | |
| Trade Show Graphics | |
| Vehicle Graphics | |
| Floor Graphics | |
| Temporary Outdoor Signage | |
| Finish | Matte |
| Ink Type | Aqueous |
| Latex | |
| Media Opacity | Translucent |
| Media Type | Adhesive Backed |
| Fabric |
| Properties | Description |
| Material | 40-45% polyester, 40-45% pulp-cellulose |
| Gauge | 6 mil |
| Adhesive | Low tack removable and repositionable adhesive |
| Release Liner | 6 mil |
| Total Gauge | 12 mil |
| Printer/Ink Compatibility | Compatible with all thermal and piezo inkjet printers using pigment-based inks. |
| Software Settings | Optimized printer settings will vary from printer manufacturers. A fine art paper or matte paper setting is an appropriate starting point. However, we recommend that you try different settings to achieve optimum performance for your specific application. However, we recommend a custom ICC profile for optimal results. Please refer to www.lexjet.com for starting-point ICC profiles for some printers. |
| Finishing/Post Processing | Use a carbide knife for kiss and die cutting. For additional protection, liquid or spray coatings are recommended. Recommended outdoors for up to six months without additional protection. |
| Light Fastness | The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data. |
| Surface Preparation | The non-porous flat surface should be cleaned and free of dust and debris. |
| Optimal Print Environment | 59-77° F, 20-80% R.H |
| Service Temp. Range | For end use: 0- 176° F |
| Handling Recommendations | Due to the absorptive nature of the coating, you should avoid touching the coated surface of the film. To install the graphic, peel 4 inches of the liner off the graphic and place on wall. Continue to peel back 4 inches of the liner incrementally while mounting. |
| Ideal Storage Conditions | 50-80° F, 20-80% R.H. (a controlled environment is recommended); store vertically in original packaging. |
| Shelf Life | 1 year from the LexJet ship date when stored in proper conditions. |
| ACT Compliance | Photo Tex has been tested and is ACT compliant for Lead and Phthalate. It meets requirements for CPSC 16 CFR 1303, H.R. 4040 CPSIA 2008 Section 101 and H.R. 4040 CPSIA 2008 Section 108. |
| Environmental and Toxicity Notes | PhotoTex has no detrimental concerns of Phthalates, no PVC, no Glycol-ether and no Formaldehyde. |
11 in x 17 in - 200 Sheets 
Earn 409 points
36 in x 100 ft - 1 Roll (3 in Core)
Earn 345 points
60 in x 100 ft - 1 Roll (3 in Core)
Earn 522 points
24 in x 20 ft - 1 Roll (3 in Core)
Earn 100 points
42 in x 100 ft - 1 Roll (3 in Core)
Earn 370 points
24 in x 100 ft - 1 Roll (3 in Core)
Earn 252 points
