Picture of Photo Tex PSA Fabric - Aqueous 60in x 100ft

Photo Tex PSA Fabric - Aqueous 60in x 100ft

Photo Tex adhesive-back fabric sticks to any non-porous flat surface and is easy to install, creating brilliant, seamless images with dynamic, vivid colors.


... Read More

Brand: Photo Tex

Availability: In stock
SKU: PT60100
Price: $522.00 ($1.04 / SQ. FT.)
Earn 522 points

Wall Mural Banner

Photo Tex adhesive-back fabric sticks to any non-porous flat surface and is easy to install, creating brilliant, seamless images with dynamic, vivid colors. Photo Tex works indoors or out, so the sharp graphics will not shrink, wrinkle or rip in any temperature or climate change. It is ideal for walls and wall murals in restaurants, retail settings, offices, vehicles, and more. Photo Tex will easily wrap around corners, poles, and even ceilings, and it is removable, reusable, and repositionable and won’t leave any residue behind. Other application ideas for this versatile fabric include windows, doors, sign boards, elevators, and more. Photo Tex is compatible with aqueous inkjet and HP Latex printers.

 

 View the video below to see Photo Tex in action:

 

 

Technical Specifications

Product Type Inkjet Printable Media
Thickness 12 mil
Applications - Media Featured
Wall Murals
Window Graphics
Interior Décor
Photographs
POP/ Indoor Signage
Soft Signage
Trade Show Graphics
Vehicle Graphics
Floor Graphics
Temporary Outdoor Signage
Finish Matte
Ink Type Aqueous
Latex
Media Opacity Translucent
Media Type Adhesive Backed
Fabric
Core Size 3 in
Width 60 in
Length 100 ft
Units 1 Roll
Edge Loyalty Points Multiplier 1x Edge Points
Double Sided No
Properties Description
Material 40-45% polyester, 40-45% pulp-cellulose
Gauge 6 mil
Adhesive Low tack removable and repositionable adhesive
Release Liner 6 mil
Total Gauge 12 mil
Printer/Ink Compatibility Compatible with all thermal and piezo inkjet printers using pigment-based inks.
Software Settings Optimized printer settings will vary from printer manufacturers. A fine art paper or matte paper setting is an appropriate starting point. However, we recommend that you try different settings to achieve optimum performance for your specific application. However, we recommend a custom ICC profile for optimal results. Please refer to www.lexjet.com for starting-point ICC profiles for some printers.
Finishing/Post Processing Use a carbide knife for kiss and die cutting. For additional protection, liquid or spray coatings are recommended. Recommended outdoors for up to six months without additional protection.
Light Fastness The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data.
Surface Preparation The non-porous flat surface should be cleaned and free of dust and debris.
Optimal Print Environment 59-77° F, 20-80% R.H
Service Temp. Range For end use: 0- 176° F
Handling Recommendations Due to the absorptive nature of the coating, you should avoid touching the coated surface of the film. To install the graphic, peel 4 inches of the liner off the graphic and place on wall. Continue to peel back 4 inches of the liner incrementally while mounting.
Ideal Storage Conditions 50-80° F, 20-80% R.H. (a controlled environment is recommended); store vertically in original packaging.
Shelf Life 1 year from the LexJet ship date when stored in proper conditions.
ACT Compliance Photo Tex has been tested and is ACT compliant for Lead and Phthalate. It meets requirements for CPSC 16 CFR 1303, H.R. 4040 CPSIA 2008 Section 101 and H.R. 4040 CPSIA 2008 Section 108.
Environmental and Toxicity Notes PhotoTex has no detrimental concerns of Phthalates, no PVC, no Glycol-ether and no Formaldehyde.

Customer Reviews


  • Only registered users can write reviews

Review Breakdown 0 review(s)

5
0%
4
0%
3
0%
2
0%
1
0%