||Film plus adhesive -0.007 (200)-- µµ µm)
Film plus adhesive
0.007 (200) --ASTM D-645
|Quick Tack lb. /in² (N/25mm)
||Stainless Steel - 2.1 (9.2) - MACtac CTM-25
|Peel Adhesion lb./in. (N/25 mm)
||180° on Stainless Steel, 24 hr- 2.1 (9.2) - ASTM D-903
|Dimensional Stability, inches (mm) 48 hours @ 158°F
||MACtac CTM-21 (Method D) 10” x 10” Sample Bonded to aluminum
||** When applying ROODLE at temperatures below 50°F the semi-rigid vinyl face will become brittle. Therefore special care must be employed during installation to keep it from tearing.
||-40°F to 180°F (-40°C to 82°C)
|Surface Burning Characteristics (Meets ANSI, NFPA, & IFC as class A)
||ASTM E84-01 or ANSI/NFPA 255 or IFC 8-
||The outdoor durability of the unprinted film is 4 years. ROODLE has up to 2 year removability after application. Overlamination of the inkjet-printed material with Permacolor® overlaminates delays color fading that may occur over time. This color fading is mainly dependent upon the inks quality (see technical data sheets given by the ink manufacturers) and the pressure sensitive media being used.
||2 years from Date of Manufacture when stored at 60/77°F (15/25°C) and 50% relative humidity in the original package.