Picture of Mactac IMAGin® M-Dot "ONE-STEP" Matte White PVC Dot Adhesive Vinyl - 54in x 164ft

Mactac IMAGin® M-Dot "ONE-STEP" Matte White PVC Dot Adhesive Vinyl - 54in x 164ft

Mactac IMAGin® M-Dot is a soft-calendared PVC film designed for Latex, UV and solvent-based ink jet printing. The product is coated on one side with a clear removable, semi-sphere structured dot, pressure sensitive adhesive and supplied with a 5 mil coated paper release liner. Designed for short to moderate term indoor and short term outdoor advertising and promotions on flat, smooth surfaces. Examples include: windows, walls, trade shows, POP or POS advertising, discount campaigns. ... Read More

Brand: Mactac

SKU: MD228W54L164
Price: $267.47 ($0.36 / SQ. FT.)
Earn 268 points

Mactac IMAGin® M-Dot "ONE-STEP" Matte white PVC Dot Adhesive Vinyl is a matte white, soft-calendared PVC film designed for Latex, UV and solvent-based ink jet printing. The product is coated on one side with a clear removable, semi-sphere structured dot, pressure sensitive adhesive and supplied with a 5 mil coated paper release liner. Mactac IMAGin® M-Dot "ONE-STEP" is designed for short to moderate term indoor and outdoor advertising and promotions on flat, smooth surfaces. Examples include: windows, walls, trade shows, POP or POS advertising, discount campaigns.

Technical Specifications

Width 54 in
Length 164 ft
Units 1 Roll
Edge Loyalty Points Multiplier 1x Edge Points
Finish Matte
Color White
Ink Type Latex
UV Curable
Solvent
Thickness 4.70 mil
Physical Properties
Film Thickness 4.7 mil (120µm)
Total thickness 9.4 mil (240µm)
Peel Adhesion Lb./in. (g/25mm)
180° on glass - 24 hr. - 0.81 (375) FTM - 1
Quick Tack, Ib./in² (N/25mm)
Stainless Steel 0.55 (250) FTM - 9
Elongation @ break (%) > 150
Temperature Ranges
Minimum Application: 40°F (+5°C)
End Use: -4°F to 158°F (-20°C to 70°C)
Additional Properties
Durability The indoor durability of this film is 1 year. This product is designed for short term indoor and applications. It can be used outdoors in locations well protected from water for very short term applications, at your own risk. Over-lamination of this inkjet-printed media is not recommended.
Shelf Life 1 year from D.O.M. when stored at 60/77°F (15/25°C) and 50% relative humidity in the original package
Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
Application Warning Do not apply using the Wet application method.