Bfree Frosted v2 is a 3.1-mil translucent, matte frosted, polymeric PVC film designed for solvent-based ink jet printing. The product is coated on one side with a micro-structured, repositionable, permanent, clear acrylic pressure sensitive adhesive and is supplied with 80# Polycoated, layflat liner. The microstructured adhesive allows for the increased speed of dry application on windows with no air bubbles or wrinkling. It also eliminates the messy clean-up of wet-application fluids.
Bfree Frosted v2 is designed for indoor and outdoor window graphics and internally illuminated signs (light boxes). This version 2 can also be used for non-printed window shading!
Please Note: do not mix Bfree Frosted v2 media with the original JT5796MBF in the same job. The finishes are not an exact match.
If a wet apply is required, then Mactac recommends using JT5798 or Glass Décor 700 series films.
