| Properties |
Description |
| Material |
Matte Polypropylene (100% Recyclable Material) |
| Gauge |
8 mil |
| Basis Weight |
130 gms |
| Tensile Strength |
152/123 (lbs/inch) |
| Tear Strength |
Weft 22, Warp 13 |
| Opacity |
>90% |
| Gloss Level @ 60° |
8-15 |
| Whiteness |
>130 CIE |
| L*a*b* Color Space |
L* = 93.27, a*= -0.56, b*= -1.47 |
| Printer/Ink Compatibility |
Compatible with all thermal and piezo inkjet printers using water based dye and pigment-based inks. |
| Software Settings |
For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software. However, if these tools are not available printers should be set for the highest print quality and media selection should be "heavy coated". Ink coverage up to 250% is recommended. |
| Light Fastness |
The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Please consult with your ink manufacturer for light fastness data. |
| Grommeting |
Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability. |
| Tape & Stitched Hem |
Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Heavy Duty Banner Tape. |
| Finishing/Post Processing |
Pressure sensitive vinyl laminates like LexJet's Elite UV Vinyl can be applied to increase the fade and abrasion resistance of the image. Before applying the laminate, allow the image to dry for 24 hours. |
| Optimal Service Environment |
For printing: 60° -80° F, 50% Relative Humidity. |
| Handling Recommendations |
Due to the absorptive nature of the coating, you should avoid touching the coated surface. It's always recommended that cotton gloves be used when handling inkjet coated materials. Rolls of LexJet film are supplied with the coated side facing out. |
| Service Temp. Range |
-40° to 176° F (-40° C to 80° C) |
| Ideal Storage Conditions |
70° F (21° C), 50% R.H. (a controlled environment is recommended); store in original packaging. |
| Shelf Life |
1 year from the LexJet ship date when stored in proper conditions. |
