Picture of LexJet TOUGHcoat™ ThriftyBanner - 36in x 40ft

LexJet TOUGHcoat™ ThriftyBanner - 36in x 40ft

LexJet TOUGHcoat(tm) ThriftyBanner is a 16-mil scrim-reinforced vinyl with a white point that enables bright, colorful photos to be printed on a durable, weat ... Read More

Brand: LexJet

Availability: In stock
SKU: TBAN36
UPC: 848412000764
Price: $150.73 ($1.26 / SQ. FT.)
Earn 151 points

LexJet TOUGHcoat™ ThriftyBanner is a 16-mil scrim-reinforced vinyl with a white point that enables bright, colorful photos to be printed on a durable, weather-resistant surface. It provides an economical option for printing higher runs of photo-intensive banners that will be exposed to the weather.

The super smooth, bright-white surface and superior ink-saturation properties of this 16-mil material provide deep rich colors and the expanded gamut needed to produce great-looking photos or graphics with hard-to-hit spot colors. The TOUGHcoat™ formulation provides a high level of resistance to water and scratching.

LexJet TOUGHcoat™ ThriftyBanner is compatible with all aqueous inkjet printers, whether they use dye or pigment inks or thermal or piezo printheads.

From the LexJet Blog

A New Spin on Showing School Spirit

Banners displayed during high school sporting events are nothing new. But photographer Carl Caylor of Photo Images by Carl in Iron Mountain, Mich., put a different spin on the whole concept. During his son Wyatt's senior year, he took portrait photos of all of the senior football players, added some special effects and printed them out poster-size.

Technical Specifications

Product Type Inkjet Printable Media
Thickness 16 mil
Paper Weight 450 gsm
Applications - Media Banners
Temporary Outdoor Signage
Finish Matte
Ink Type Aqueous
Media Type Vinyl: Banner
Banner
Core Size 2 in
Width 36 in
Length 40 ft
Units 1 Roll
Edge Loyalty Points Multiplier 1x Edge Points
Double Sided No
Durability Water Resistant
Tear Resistant
Properties Description
Material Tear-resistant polyester fabric embedded between two white vinyl layers
Gauge 16 mil
Basis Weight 450g
White Point ≥ 130 (CIE)
Opacity >95
Gloss Level @ 60° 19.2 ± 5
L*a*b* Color Space L* = 93.27, a*= -0.56, b*= -1.47
Printer/Ink Compatibility Compatible with all thermal and piezo inkjet printers using water-based dye and pigment-based inks.
Imaging Side Material is packaged with printable side facing up. Printable surface can be identified by a slight tackiness.
Software Settings The coating on this product is engineered for better than 250% ink coverage. A Heavy Weight Coated setting is the recommended starting point. However, we recommend a custom ICC profile for optimal results. Please refer to www.lexjet.com for starting-point ICC profiles for some printers.
Finishing/Post Processing Pressure-sensitive vinyl laminates, like LexJet Elite UV Vinyl, can be applied to increase the fade and abrasion resistance of the image. Before applying the laminate, allow the image to dry for 24 hours.
Light Fastness The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data.
Water Resistance and Surface Protection To obtain a high degree of water resistance, use only pigmented ink. Allow the print to dry for 24 hours before exposing to moisture. Lamination is not required. Ink saturation over 250% can affect the waterfast properties and show ink bleed. Dye-based inks will yield good color gamut, but bleeding may occur when the image gets wet. Over laminating dye-based ink will not eliminate image bleed, unless the material is completely sealed to a non-porous surface. To avoid perforating the laminate, use banner tape instead of sewing (see below). Dirt and stains cannot be cleaned from the imaged surface and the surface can be damaged from excessive folding or creasing.
Hemming Banner tape can be used and is preferred to sewing because the sewing process can scratch the coating. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch.
Grommeting Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Optimal Print Environment 70° F (21° C), 50% R.H
Handling Recommendations Due to the absorptive nature of the coating, you should avoid touching the coated surface. It's always recommended that cotton gloves be used when handling inkjet coated materials. Rolls of LexJet film are supplied with the coated side facing out.
Service Temp. Range -40° - 176° F (-40° C to 80° C).
Minimum Application Temp. 40° F
Ideal Storage Conditions 70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging.
Shelf Life 1 year from the LexJet ship date when stored in proper conditions.
Health & Safety WARNING: This product contains a chemical known to the State of California to cause cancer.

Customer Reviews

5 / 5


  • Only registered users can write reviews

Review Breakdown 1 review(s)

5
100%
4
0%
3
0%
2
0%
1
0%

  
This product is fantastic!
The ink-saturation properties allow for great looking photos.