Picture of LexJet TOUGHcoat™ Synthetic Banner - 60in x 50ft

LexJet TOUGHcoat™ Synthetic Banner - 60in x 50ft

With LexJet TOUGHcoat™ Synthetic Banner, you can use an aqueous inkjet printer to produce durable, high-impact banners that incorporate all 3 Rs of s ... Read More

Brand: LexJet

SKU: AQTVK6050
UPC: 848412000511
Price: $312.18 ($1.25 / SQ. FT.)
Earn 313 points
Check Availability

With LexJet TOUGHcoat™ Synthetic Banner, you can use an aqueous inkjet printer to produce durable, high-impact banners that incorporate all 3 Rs of sustainability: Reduce, Reuse and Recycle. This thin (11 mil), lightweight (145g), tough substrate uses substantially fewer resources to manufacture and ship. But because the durability of this material is comparable to scrim banner material, graphics printed on LexJet TOUGHcoat™ Synthetic Banner can be reused at multiple events and trade shows.

LexJet TOUGHcoat™ Synthetic Banner is a high-density polyethylene (HDPE), meaning that it is 100% recyclable and accepted at most local recycling facilities. LexJet Synthetic Banner uses 70% less material to do the same job as traditional banner materials, reducing the environmental impact of manufacturing, shipping, and disposal.

This product is compatible with all printers that use aqueous inks, whether they use dye or pigment inks or thermal or piezo printheads.

Technical Specifications

Product Type Inkjet Printable Media
Thickness 11 mil
Paper Weight 145 gsm
Applications - Media Wall Murals
Interior Décor
Featured
Banner Stands
Temporary Outdoor Signage
POP/ Indoor Signage
Finish Semi Matte
Ink Type Aqueous
Latex
Media Opacity Opaque
Media Type Tyvek
Banner
Core Size 2 in
Width 60 in
Length 50 ft
Units 1 Roll
Edge Loyalty Points Multiplier 1x Edge Points
Double Sided No
Durability Water Resistant
Indoor
Outdoor
Tear Resistant
Properties Description
Material 100% Recyclable HDPE 1082 Tyvek®
Gauge 11 mil
Weight 145± 5% (70% less material than typical scrim banner)
Whiteness >120 CIE
Tensile Strength 63.64 (MD) Test Method ATSM D5035
Tear Strength MD: 8.0N, XD: 7.3N
Temperature Resistance -100° F- 270° F (-56° C- 104° C)
Fungus Resistant Yes
Opacity >98%
L*a*b* Color Space L*: >97; a*: 3.4± 0.5; b*: -8± 1.0
Printer/Ink Compatibility Compatible with all thermal and piezo inkjet printers using water-based dye and pigment-based inks as well as printers using latex ink technology.
Imaging Side Material is packaged with printable side facing up. Printable surface can be identified by a slight tackiness.
Software Settings The coating on this product is engineered for better than 400% ink coverage. To optimize print quality, the printer mode should be set to best and media selection should be set on Heavyweight Coated Paper up to 1440 dpi. However, we recommend a custom ICC profile for optimal results. Please refer to www.lexjet.com for an ICC profile for some printers.
Finishing/Post Processing Pressure-sensitive vinyl laminates like LexJet's Elite UV Vinyl Laminate can be applied to increase the fade and abrasion resistance of the image. Before applying the laminate, allow the image to dry for 24 hours.
Fastening Tyvek™ can be sewn, grommeted, or hemmed with LexJet Heavy Duty Banner Tape. Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Light Fastness The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data.
Optimal Service Environment For printing: 60° - 80° F, 50% Relative Humidity.
Handling Recommendations Due to the absorptive nature of the coating, you should avoid touching the coated surface. It's always recommended that cotton gloves be used when handling inkjet coated materials. Rolls of LexJet film are supplied with the coated side facing out.
Service Temp. Range -40° - 176° F (-40° C to 80° C).
Ideal Storage Conditions 70° F (21° C), 50% R.H. (a controlled environment is recommended); store in original packaging.
Shelf Life 1 year from the LexJet ship date when stored in proper conditions.

Customer Reviews


  • Only registered users can write reviews

Review Breakdown 0 review(s)

5
0%
4
0%
3
0%
2
0%
1
0%
Technical Specifications