| Properties |
Description |
| Material |
Calendared PVC |
| Gauge |
3.4 mil |
| Gauge of Adhesive |
.8 to 1 mil removable acrylic adhesive |
| Release Liner |
6.7 mil, 90# lay flat liner |
| Total Gauge |
11 mil |
| 180° Peel Adhesion |
5-15 oz/in. to glass |
| Printer/Ink Compatibility |
Compatible all inkjet printers using eco solvent, solvent, latex and UV-curable ink. |
| Software Settings |
Printer settings will vary between printer manufacturers. Recommended heater settings: Pre-heat 30° C, platen 33° C and post-heat 35° C have been found as a good place to start. |
| Color Matching |
For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software. |
| Finishing/Post Processing |
Before finishing, trimming and installing the graphic, allow the image to completely evaporate and dry for a minimum of 24 hours to ensure the solvents are gone from the print. Failure to do so may facilitate solvent penetration resulting in vinyl degradation. |
| Light Fastness |
The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data. |
| Removability/Expected Life |
Removable for up to one year under normal exposure conditions from most common substrates. |
| Optimal Print Environment |
70° F (21° C), 50% R.H |
| Service Temp. Range |
-40° - 176° F (-40° C to 80° C). |
| Minimum Application Temp. |
40° F |
| Ideal Storage Conditions |
70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging. |
| Shelf Life |
1 year from the LexJet ship date when stored in proper conditions. |
