| Properties |
Description |
| Material |
Resin-coated (RC) photo paper |
| Gauge |
9.5 mil |
| Adhesive |
Permanent adhesive with silicon release liner |
| Basis Weight |
190g |
| Printer/Ink Compatibility |
Compatible with all thermal and piezo inkjet printers using water-based dye and pigment-based inks. |
| Imaging Side |
Material is packaged with printable side facing up. Printable surface can be identified by a slight tackiness. |
| Software Settings |
The coating on this product is engineered for better than 300% ink coverage. A photo luster, satin or semi-gloss setting is the recommended starting point. However, we recommend a custom ICC profile for optimal results. Please refer to www.lexjet.com for starting-point ICC profiles for some printers. |
| Finishing/Post Processing |
Pressure-sensitive vinyl laminates, like LexJet Elite UV Vinyl Laminate, can be applied to increase the fade and abrasion resistance of the image. Before applying the laminate, allow the image to dry for 24 hours. Thermal laminates may also be used. |
| Light Fastness |
The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data. |
| Optimal Print Environment |
70° F (21° C), 50% R.H |
| Optimal Service Environment |
For printing: 60° - 80° F, 50% Relative Humidity. |
| Handling Recommendations |
Due to the absorptive nature of the coating, you should avoid touching the coated surface. It's always recommended that cotton gloves be used when handling inkjet coated materials. Rolls of LexJet film are supplied with the coated side facing out. |
| Service Temp. Range |
-40° - 176° F (-40° C to 80° C). |
| Ideal Storage Conditions |
70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging. |
| Shelf Life |
1 year from the LexJet ship date when stored in proper conditions. |
