Properties |
Description |
Material |
3 mil calendered PVC film |
Adhesive |
Solvent-based acrylic pressure sensitive adhesive |
Release Liner |
40# polycoated Kraft paper |
Peel Adhesion |
(Test method PSTC-1): Stainless Steel= 45-70 oz./in.; Acrylic= 55-85 oz./in.; Polypropylene= 20-45 oz./in. |
Shear Strength |
PSTC 7, 1 sq. in., 4 lb. load : 25+ hours no failure |
UVA Block |
Yes, 90-95% |
Inkjet Media Preparation |
Printer manufacturers recommend that you allow your print to dry for a minimum of 24 hours before lamination. In areas with high humidity dry times can be longer. |
Laminator Compatibility |
It's recommended that your laminator be equipped with a release liner take-up reel. All LexJet laminates are provided on 3" standard cores. |
Laminator Settings |
NO HEAT IS REQUIRED. Apply 40-80 psi and use 2-5 feet per minute for dwell time depending on the application. |
Expected Exterior Exposure |
This product is designed for interior applications. Exterior resistance has not been determined. |
Adhesive Cure Time |
After applying the laminate, allow curing for a minimum of 2 hours before cutting or trimming. Maximum bond strength is reached in 24 hours. |
Min. Application Temp |
50° F (10° C) |
Ideal Storage Conditions |
70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging. |
Shelf Life |
1 year from the LexJet ship date when stored in proper conditions. |
Tip |
It is not recommended that you pre-coat any paper-faced products, such as Gator Board or Foam Core, with an adhesive that has a plastic carrier. The absorptive nature of paper products can cause the board to contract and expand with temperature and humidity fluctuations causing the release liner to tunnel. The slip aid, which is often found on PVC materials, should be removed with a suitable detergent. All substrates should be tested for your specific application prior to final job production. |