LexJet Performance Satin UV Vinyl Laminate (3 Mil)

LexJet Performance Satin UV Vinyl Laminate 3 Mil is a thin, economical vinyl laminating film that adds an extra layer of protection to short-term graphics. ... Read More

Pressure Sensitive
Satin (Vinyl (PVC))

Be the first to review this product

Brand: LexJet

LexJet Performance Satin UV Vinyl Laminate 3 Mil is a thin, economical vinyl laminating film that adds an extra layer of protection to short-term graphics. It is good way to add value and functionality to projects such as construction barricades, event graphics, legal and corporation presentations, and promotional signage.

The satin finish minimizes glare. UV inhibitors help the film withstand exposure to sunlight and fluorescent lighting.

LexJet Performance Satin UV Vinyl Laminate 3 Mil was previously known as 3 Mil GraphicShield UV Satin.

Technical Specifications

Product Type	Laminates & Coatings
Adhesive Type	Pressure Sensitive
Applications	Backlit
	Museum
	Banner
	Outdoor Signage
	Banner Stand
	POP / Indoor Signage
	Posters
	Trade Show
Finish	Satin
Laminate & Coating Type	Pressure Sensitive
Material	Vinyl (PVC)

Properties	Description
Material	3 mil calendered PVC film
Adhesive	Solvent-based acrylic pressure sensitive adhesive
Release Liner	40# polycoated Kraft paper
Peel Adhesion	(Test method PSTC-1): Stainless Steel= 45-70 oz./in.; Acrylic= 55-85 oz./in.; Polypropylene= 20-45 oz./in.
Shear Strength	PSTC 7, 1 sq. in., 4 lb. load : 25+ hours no failure
UVA Block	Yes, 90-95%
Inkjet Media Preparation	Printer manufacturers recommend that you allow your print to dry for a minimum of 24 hours before lamination. In areas with high humidity dry times can be longer.
Laminator Compatibility	It's recommended that your laminator be equipped with a release liner take-up reel. All LexJet laminates are provided on 3" standard cores.
Laminator Settings	NO HEAT IS REQUIRED. Apply 40-80 psi and use 2-5 feet per minute for dwell time depending on the application.
Expected Exterior Exposure	This product is designed for interior applications. Exterior resistance has not been determined.
Adhesive Cure Time	After applying the laminate, allow curing for a minimum of 2 hours before cutting or trimming. Maximum bond strength is reached in 24 hours.
Min. Application Temp	50° F (10° C)
Ideal Storage Conditions	70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging.
Shelf Life	1 year from the LexJet ship date when stored in proper conditions.
Tip	It is not recommended that you pre-coat any paper-faced products, such as Gator Board or Foam Core, with an adhesive that has a plastic carrier. The absorptive nature of paper products can cause the board to contract and expand with temperature and humidity fluctuations causing the release liner to tunnel. The slip aid, which is often found on PVC materials, should be removed with a suitable detergent. All substrates should be tested for your specific application prior to final job production.