| Properties |
Description |
| Material |
5 mil textured PVC film |
| Adhesive |
1.5 mil permanent acrylic pressure sensitive |
| Release Liner |
1.5 mil, clear polyester liner |
| Peel Adhesion |
(Test method PSTC-101): Stainless Steel= 40 oz/in |
| UVA Light Protection |
No |
| Inkjet Media Preparation |
Printer manufacturers recommend that you allow your print to dry for a minimum of 24 hours before lamination. In areas with high humidity dry times can be longer. |
| Laminator Compatibility |
It's recommended that your laminator be equipped with a release liner take-up reel. All LexJet laminates are provided on 3" standard cores. |
| Laminator Settings |
NO HEAT IS REQUIRED. Apply 40-80 psi and use 2-5 feet per minute for dwell time. The top and bottom web tension should be minimal. |
| Adhesive Cure Time |
After applying the laminate, allow curing for a minimum of 2 hours before cutting or trimming. Maximum bond strength is reached in 24 hours. |
| Floor Graphics Slip Rating |
UL Certified for slip resistance |
| Min. Application Temp. |
40° F (5° C) |
| Service Temp. Range |
-40° F to 180° F (-40° to 81° C ) THIS IS NOT A LAMINATOR SETTING. |
| Ideal Storage Conditions |
70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging. |
| Shelf Life |
1 year from the LexJet ship date when stored in proper conditions. |
