The next generation LexJet CrystalClear-X Removable Adhesive is a clear 2.5-mil polyester with a permanent solvent acrylic adhesive on one side and removable solvent adhesive on the other that’s ideal for temporary window applications. The air flow release liner on the removable side provides easy bubble-free installation and no-residue removal. The grid patterned release liner is on the removable side.
Prior to application, clean the mounting substrate with soap and water. Rinse thoroughly with water and wipe dry with a lint-free cloth. Window cleaners are not recommended.
| Product Type | Mounting Adhesives |
| Adhesive Material | Acrylic |
| Adhesive Type | Pressure Sensitive |
| Applications - Adhesive | Window Graphics |
| Mounting Substrate | Acrylic |
| Permanence | Removable |
| Properties | Description |
| Material | Clear PET |
| Adhesive | 1 mil Permanent Side; 0.6 mil Removable Side |
| Core Size | 3-inch Core |
| Film/Adhesive Ratio | 1:0.9:0.6 |
| Release Liner | 2 Side PE Coated, 1 Side Siliconized Kraft |
| Shear | (ASTM D2979-71): 550 gm/sq. cm |
| Optimal Lamination Settings | 1 ft. to 8 ft. (0.3m to 2.5m) per minute (Roll Laminator Only) |
| Adhesive Cure Time | After applying the laminate, allow curing for a minimum of 2 hours before cutting or trimming. Maximum bond strength is reached in 24 hours. |
| Optimal Service Environment | Room temperature to 104°F (40°C) |
| Service Temp. Range | -4°F to 248°F (-20° C to 120° C) |
| Ideal Storage Conditions | 73° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging. |
| Shelf Life | 1 year from the LexJet ship date when stored in proper conditions. |
| Special Note | Due to varying dimensional stability of paper this product is not recommended for use with paper stocks. |
| Application Recommendations | This product can be applied using wet or dry method |
51 in x 164 ft (3 in Core)
Earn 660 points
