Picture of LexJet CrystalClear Permanent Adhesive- 24in x 150ft

LexJet CrystalClear Permanent Adhesive- 24in x 150ft

LexJetCrystalClear Permanent Adhesive provides the exceptional clarity and ease of use needed for face-mounting graphics to rigid, clear surfaces including ac ... Read More

Brand: LexJet

Price: $364.41 ($1.21 / SQ. FT.)
Earn 365 points

LexJet CrystalClear Permanent Adhesive provides the exceptional clarity and ease of use needed for face-mounting graphics to rigid, clear surfaces including acrylic, Plexiglass, Lexan, polycarbonate or glass. It is a popular choice for mounting backlit images, and can also be used to mount motion- or 3D-graphics to lenticular lenses.

CrystalClear Permanent Adhesive consists of a thin, clear polyester film coated on both sides with an optically clear, permanent adhesive. A clear polyester release liner protects each side of the film until the adhesive is ready to apply.

From the LexJet Blog

How Bumblejax Gives Mounted Photos Some Real Pop

When Seattle, Wash.-based Bumblejax wanted to create an ecommerce site that allowed anyone to have access to high-end, modern face-mounted photo displays, they tested out several different photo papers before settling on the winning product. "The thing about acrylic face-mounting is that not all papers work well with it," says Tate Dwinnell, who runs Bumblejax with his brother, Corey.

This product is temporarily out of stock, we apologize for the inconvenience. Please contact a LexJet sales specialist to discuss alternate solutions.

Technical Specifications

Product Type Mounting Adhesives
Adhesive Material Acrylic
Adhesive Type Pressure Sensitive
Finish Optically Clear
Applications - Adhesive POP/ Indoor Signage
Window Graphics
Museum Graphics
Outdoor Signage
Mounting Substrate Acrylic
Permanence Permanent
Core Size 3 in
Width 24 in
Length 150 ft
Units 1 Roll
Edge Loyalty Points Multiplier 1x Edge Points
Properties Description
Adhesive 1-mil, super clear, permanent acrylic pressure sensitive adhesive
Carrier 1 mil clear polyester
Release Liner 2 mil, 40# polycoated Kraft paper
Peel Adhesion (PSTC 1, modified for 72 hour dwell time): Stainless steel = 41 oz./in.; Acrylic = 2 oz./in.; Glass = 39 oz./in.
Shear Strength (PSTC 7, 1 hour dwell, 1 sq in, 4 lb load): 100+ hours no failure
Tack (ASTM D2979-88): 350 gm/sq. cm
Laminator Compatibility It's recommended that your laminator be equipped with a release liner take-up reel. All LexJet laminates are provided on 3" standard cores.
Laminator Settings Apply 80-100 psi and use 2-3 feet per minute for dwell time. Between 90° to 100° F heat is recommended, to help the adhesive flow will produce a more consistent adhesion to the print. All substrates should be tested for your specific application prior to final job production.
Using a Sled It is strongly recommended that you use a rigid sled (1/8" or thicker) such as polycarbonate, acrylic, masonite or aluminum. This will ensure consistent pressure across the web. Apply a release liner to your sled to prevent adhesive build-up. Use strong tape, such as packaging tape, to attach the entire width of the leading edge of the graphic to the sled.
Adhesive Cure Time After applying the laminate, allow curing for a minimum of 2 hours before cutting or trimming. Maximum bond strength is reached in 24 hours.
Service Temp. Range -20° F to 257° F (-29° to 125° C ) THIS IS NOT A LAMINATOR SETTING.
Ideal Storage Conditions 70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging.
Shelf Life 1 year from the LexJet ship date when stored in proper conditions.
Application Recommendations This product can be applied using wet or dry method

Customer Reviews

5 / 5

  • Only registered users can write reviews

Review Breakdown 1 review(s)


Awesome for lenticular
This double-sided adhesive worked amazingly for my Lenticular projects