| Technical Specifications |
|
| Ink technology |
Compatible with HP Bright Office Inks, HP Vivid Photo Inks, HP PageWide XL pigment inks, and HP Latex Inks |
| Weight (With liner) |
289 g/m² per ISO 536 Test Method |
| Thickness (With liner) |
304 microns/12 mil per ISO 20534 Test Method |
| Liner |
120 g/m², double-sided PE-coated silicone paper |
| Adhesive |
Clear, removable, and repositionable adhesive |
| Removability |
Up to 3 years removable/repositionable indoors |
| Opacity |
Greater than 85% per TAPPI T-425 Test Method and ISO 2471 Test Method |
| Brightness |
Greater than 85% per TAPPI T-452 Test Method |
| Whiteness |
118 per ASTM E313-98 Test Method |
| Finish |
Finish |
| Slip rating |
Certified according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586)6 |
| Operating temperature |
15 to 25° C / 59 to 77° F |
| Operating humidity |
20 to 80% RH |
| Water resistance |
Moderately water-resistant8 |
| Wind orientation |
Print side out |
| Core size |
3-in core with a removable 2-in core adapter |
| Dry time |
Immediate |
| Lamination |
For additional protection, liquid or spray coatings are recommended⁹ |
| HP PageWide XL cutter |
The weight of this material is higher than the recommended weight limit for the HP PageWide XL cutter, which may reduce the expected life of the cutter |
| Storage Guidelines |
|
| Shelf life |
1 year, unopened in original packaging |
| Storage temperature |
10 to 27° C / 50 to 80° F |
| Storage humidity |
35 to 65% RH |
| Additional Information |
|
| Environmental |
Adhesive fabric made with recycled water bottles2 and coating materials, REACH compliant3 |
| Finishing/post processing |
Use a carbide knife for kiss and die cutting |
| Installation tip |
To install the graphic, peel 101 millimeters (4 inches) of the release liner off the graphic and place on wall or
surface. Continue to peel back 101 millimeters (4 inches) of the liner incrementally while mounting. |
| Flame resistance |
B1, and ASTM E845 rated flame-spread performance material |
| Country of origin |
Product of China and Malaysia |
| Footnotes |
1 Product consists of PET fabric and coatings. With liner attached, 72% by weight of the product consists of recycled content.
2 100% of total PET resin in the product made from recycled water bottles. The coating does not contain recycled materials. Compliant with Global Recycled Standard (GRS) Version 4.0.
3 As of the date of this document, August 2022, this product does not contain any of the chemicals on the EU’s Candidate List for Authorization (otherwise known as Substances of Very High Concern) in concentrations exceeding 0.1%. To determine the status of SVHC in HP products, see the HP REACH Article 33 Declaration published at HP Printing Products and Consumable Supplies. https://h20195.www2.hp.com/v2/GetDocument.aspx?docname=c05996997
4 According to “The Ecology of Recycling,” published on United Nations website, UN Chronicle, see un.org/en/chronicle/article/ecology-recycling and “Reducing and Reusing Basics,” US EPA, March 2022, see https://www.epa.gov/recycle/reducing-and-reusing-basics.
5 B1, ASTM E84 approved fire certifications.
6 Slip resistance for dry environments based on testing by Sotter Engineering Corporation, February 2022, in compliance according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586).
7 Recommended on indoor smooth, non-porous, sealed flat and dry surfaces for up 3 months. Slip resistance for dry environments based on testing by Sotter Engineering Corporation, February 2022, in compliance according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586).
8 Performance varies based on printer and print profile. Water resistance testing by HP Image Permanence Lab on a range of HP media and follows ISO 18935 method. For more information, see HPLFMedia.com/hp/printpermanence.
9 For additional protection, we recommend Marabu ClearShield Professional Wall Armor. |
