Technical Specifications |
|
CPU |
32-bit CPU
|
Configuration |
Grit rolling plotter
|
Drive method |
Digital servo drive
|
Max. cutting speed |
58.5 inches per second (45 degree direction) 41.3 (axis direction)
|
Cutting force |
Max. 600 gf in 48 steps
|
Axial acceleration |
Max. 39.2 m/s2 (4 G) in 8 steps
|
Max. cutting area (W x L) |
FC9000-75 - 30 in x 164 ft
FC9000-100 - 42 in x 164 ft
FC9000-140 - 54 in x 164 ft
FC9000-160 - 64 in x 164 ft
|
Compatible roll media diameter |
Min. 2.99 in Max 7.8 in. (Max diameter is 6.29 in when included flange is installed)
|
Mechanical resolution |
0.005 mm
|
Programmable resolution |
GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm
|
Distance accuracy |
Max. 0.1 mm or 0.1 % of plotted length
|
Repeatability |
Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media)
|
Minimum character size |
Approx. 5 mm alphanumeric (varies depending on character font and media)
|
Mountable number of tools |
1 tool (cutting blade, plotting pen or pouncing tool) in standard;
2 tools (cutting blade and plotting pen) when second penholder (optional) is installed |
Blade types |
Supersteel (0.9 mm or 1.5 mm diameter)
|
Pen types |
Water-based fiber-tip pen, Oil-based ballpoint pen
|
Pouncing tool type |
Steel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12)
|
Media types |
Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick,
Sandblast resist rubber up to 1 mm thick |
Compatible paper for pouncing |
Regular paper from 0.06 to 0.13 mm thick
|
Cross-cutter |
Built into the tool carriage
|
Perforation cutting |
Supported (performed by force control)
|
Interface |
USB 2.0(Full Speed), Ethernet 10BASE-T/100BASE-TX
|
Buffer memory |
2 MB
|
Command sets |
GP-GL / HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select)
|
Condition settings |
Dual configuration (save two (2) user settings with eight (8) separate condition settings per user)
|
Display |
Graphic type LCD (3.7-inch, backlight)
|
Power source |
100 V to 240 V AC, 50 / 60 Hz
|
Power consumption |
AC100-240 V, 50/60 Hz
|
Operating environment |
50 to 95 ºF, 35 to 75 % R.H. (non-condensing)
|
Guaranteed accuracy environment |
60 to 89 ºF, 35 to 70 % R.H. (non-condensing)
|
Included software |
Windows driver, Plotter controller, Graphtec Pro Studio,
Cutting Master 4, Graphtec Studio for Mac |
Compatible OS |
Windows 10 / 8.1 / 7
Mac OS X 10.6 to 10.11
Mac OS 10.12 to 1.14
Graphtec Studio: 10.6 to 10.14
Cutting Master 4: 10.7-10.14 |
Safety |
PSE, UL/cUL, CE mark)
|
EMC |
VCCI Class A, FCC Class A, CE mark
|