Picture of General Formulations 232 Windowmark™ Perforated Vinyl 50/50 - 30in x 100ft

General Formulations 232 Windowmark™ Perforated Vinyl 50/50 - 30in x 100ft

General Formulations 232 is a 6.0 mil white front side and black adhesive side flexible vinyl film with a clear removable acrylic pressure sensitive adhesive on a layflat liner. ... Read More

Availability: In stock
SKU: 232-30
Price: $332.43 ($1.33 / SQ. FT.)
Earn 333 points

General Formulation’s Concept 232 is a 6-mil perforated window vinyl with a clear removable adhesive and a 50/50 perforation pattern with 1.5 mm holes. It is recommended for flat vertical vehicle windows and commercial store windows. CBS Outdoor approved for use in all bus and train wrap applications. The two-layer perforated liner allows trouble-free printing with UV curable, solvent and latex inks.

  • Easy to print and apply
  • Cleanly removable from glass for one year
  • Designed for exterior mounted window graphics
  • Lay flat liner offers good dimensional stability
  • For use with UV Curable, latex, low-solvent and solvent inks
  • CBS Approved

Technical Specifications

Product Type Inkjet Printable Media
Thickness 6 mil
Applications - Media Vehicle Graphics
Window Graphics
Finish Gloss
Ink Type Solvent
Media Type Adhesive Backed
Vinyl: Calendered
Width 30 in
Length 100 ft
Core Size 3 in
Units 1 Roll
Ink Type Solvent
UV Curable
Edge Loyalty Points Multiplier 1x Edge Points
Properties Description
Material Flexible vinyl film with 50% open area and a hole size of .060 inches (1.5 mm).
Gauge 6 mil
Adhesive .8 to 1.1 mil removable pressure sensitive adhesive
Release Liner 84# lay flat liner
180° Peel Adhesion 32 oz/in. to glass
Printer/Ink Compatibility Compatible all inkjet printers using latex, eco-solvent and solvent ink. Not recommended for use with UV Curable printers.
Software Settings Printer settings will vary between printer manufacturers. Recommended heater settings: Pre-heat 30° C, platen 33° C and post-heat 35° C have been found as a good place to start.
Color Matching For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software. However, if these tools are not available use one of the on-board media settings for cast vinyl.
Finishing/Post Processing Pressure-sensitive vinyl laminates, like Simple Flo Wrap Gloss UV Laminate or Optically Clear Cast Gloss Laminate, can be applied to increase the fade and abrasion resistance of the image. Before applying the laminate, allow the image to dry for 24 hours.
Light Fastness The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data.
Removability/Expected Life The removable pressure sensitive adhesive is designed for clean removal from glass. Life expectancy for exterior use is up to 1 year under normal exposure conditions.
Vehicle Regulations When this product is used on vehicles some states have minimum light transmission regulations. The user of this product is responsible for complying with these regulations.
Optimal Print Environment 70° F (21° C), 50% R.H
Service Temp. Range -40° - 176° F (-40° C to 80° C).
Minimum Application Temp. 40° F
Ideal Storage Conditions 70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging.
Shelf Life 1 year from the LexJet ship date when stored in proper conditions.

Customer Reviews

  • Only registered users can write reviews

Review Breakdown 0 review(s)