440 g/m2 or 13 oz/yd2

Weft 21, Warp 39

Yes; ASTM G21

Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.

Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal.