3 in

24 in

100 ft

1 Roll

1x Edge Points

No

Inkjet Printable Media

12 mil

Featured, Wall Murals, Window Graphics, Interior Décor, Photographs, POP/ Indoor Signage, Soft Signage, Trade Show Graphics, Vehicle Graphics, Floor Graphics, Temporary Outdoor Signage

Matte

Aqueous, Latex

Translucent

Adhesive Backed, Fabric

40-45% polyester, 40-45% pulp-cellulose

Low tack removable and repositionable adhesive

12 mil

Optimized printer settings will vary from printer manufacturers. A fine art paper or matte paper setting is an appropriate starting point. However, we recommend that you try different settings to achieve optimum performance for your specific application. However, we recommend a custom ICC profile for optimal results. Please refer to www.lexjet.com for starting-point ICC profiles for some printers.

The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data.

59-77° F, 20-80% R.H

Due to the absorptive nature of the coating, you should avoid touching the coated surface of the film. To install the graphic, peel 4 inches of the liner off the graphic and place on wall. Continue to peel back 4 inches of the liner incrementally while mounting.

1 year from the LexJet ship date when stored in proper conditions.

PhotoTex has no detrimental concerns of Phthalates, no PVC, no Glycol-ether and no Formaldehyde.