50 in

3-in adaptable

100 ft

1 Roll

1x Edge Points

No

Water Resistant, Tear Resistant

Inkjet Printable Media

POP/ Indoor Signage, Temporary Outdoor Signage

Matte

Aqueous

Opaque

Adhesive Backed, Polypropylene

Matte Polypropylene (100% Recyclable Material)

1 mil Permanent Solvent based acrylic

7.0 N/in. to stainless steel

5

L* = 97, a*= 3.8, b*= -9

For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software. However, if these tools are not available printers should be set using the UCR (Under Color Removal) technique that replaces composite black (CMY) with the appropriate amount of black ink. Settings should be adjusted for the highest print quality and media selection should be "heavy coated". Ink coverage up to 350% is recommended.

Pressure sensitive vinyl laminates, like LexJet Elite UV Vinyl, can be applied to increase the fade and abrasion resistance of the image. Before applying the laminate, allow the image to dry for 24 hours.

Due to the absorptive nature of the coating, you should avoid touching the coated surface. It's always recommended that cotton gloves be used when handling inkjet coated materials. Rolls of LexJet film are supplied with the coated side facing out.

70° F (21° C), 50% R.H. (a controlled environment is recommended); store in original packaging.