LexJet TOUGHcoat™ Synthetic Banner - 42in x 100ft- LexJet - Inkjet Printers, Media, Ink Cartridges and More

LexJet TOUGHcoat™ Synthetic Banner - 42in x 100ft

Brand: LexJet

SKU: AQTVK42

With LexJet TOUGHcoat™ Synthetic Banner, you can use an aqueous inkjet printer to produce durable, high-impact banners that incorporate all 3 Rs of s... Read More

42 in x 100 ft - 1 Roll (2 in Core) - Semi Matte
Compatible with Aqueous, Latex Printers

$437.82

($1.25 / Sq. FT)

Availability: Click for Availability

PART: AQTVK42

GTIN: 848412000986

Earn 438 points.

Description

With LexJet TOUGHcoat™ Synthetic Banner, you can use an aqueous inkjet printer to produce durable, high-impact banners that incorporate all 3 Rs of sustainability: Reduce, Reuse and Recycle. This thin (11 mil), lightweight (145g), tough substrate uses substantially fewer resources to manufacture and ship. But because the durability of this material is comparable to scrim banner material, graphics printed on LexJet TOUGHcoat™ Synthetic Banner can be reused at multiple events and trade shows.

LexJet TOUGHcoat™ Synthetic Banner is a high-density polyethylene (HDPE), meaning that it is 100% recyclable and accepted at most local recycling facilities. LexJet Synthetic Banner uses 70% less material to do the same job as traditional banner materials, reducing the environmental impact of manufacturing, shipping, and disposal.

This product is compatible with all printers that use aqueous inks, whether they use dye or pigment inks or thermal or piezo printheads.

Width

42 in

Core Size

2 in

Length

100 ft

Units

1 Roll

Edge Loyalty Points Multiplier

1x Edge Points

Double Sided

Durability

Water Resistant, Scratch Resistant, Indoor, Outdoor, Tear Resistant

Product Type

Inkjet Printable Media

Thickness

11 mil

Paper Weight

145 gsm

Applications - Media

Wall Murals, Interior Décor, Featured, Banner Stands, Temporary Outdoor Signage, POP/ Indoor Signage

Finish

Semi Matte

Ink Type

Aqueous, Latex

Media Opacity

Opaque

Media Type

Tyvek, Banner

Properties Description

Material

100% Recyclable HDPE 1082 Tyvek®

Gauge

11 mil

Weight

145± 5% (70% less material than typical scrim banner)

Whiteness

>120 CIE

Tensile Strength

63.64 (MD) Test Method ATSM D5035

Tear Strength

MD: 8.0N, XD: 7.3N

Temperature Resistance

-100° F- 270° F (-56° C- 104° C)

Fungus Resistant

Yes

Opacity

>98%

L*a*b* Color Space

L*: >97; a*: 3.4± 0.5; b*: -8± 1.0

Printer/Ink Compatibility

Compatible with all thermal and piezo inkjet printers using water-based dye and pigment-based inks as well as printers using latex ink technology.

Imaging Side

Material is packaged with printable side facing up. Printable surface can be identified by a slight tackiness.

Software Settings

The coating on this product is engineered for better than 400% ink coverage. To optimize print quality, the printer mode should be set to best and media selection should be set on Heavyweight Coated Paper up to 1440 dpi. However, we recommend a custom ICC profile for optimal results. Please refer to www.lexjet.com for an ICC profile for some printers.

Finishing/Post Processing

Pressure-sensitive vinyl laminates like LexJet's Elite UV Vinyl Laminate can be applied to increase the fade and abrasion resistance of the image. Before applying the laminate, allow the image to dry for 24 hours.

Fastening

Tyvek™ can be sewn, grommeted, or hemmed with LexJet Heavy Duty Banner Tape. Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.

Light Fastness

The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data.

Optimal Service Environment

For printing: 60° - 80° F, 50% Relative Humidity.

Handling Recommendations

Due to the absorptive nature of the coating, you should avoid touching the coated surface. It's always recommended that cotton gloves be used when handling inkjet coated materials. Rolls of LexJet film are supplied with the coated side facing out.

Service Temp. Range

-40° - 176° F (-40° C to 80° C).

Ideal Storage Conditions

70° F (21° C), 50% R.H. (a controlled environment is recommended); store in original packaging.

Shelf Life

1 year from the LexJet ship date when stored in proper conditions.

Download Product Resources

LexJet TOUGHcoat™ Synthetic Banner,

Download

Shop By Application

Shop By Department

Shop By Technology

Shop By Brand

Shop Help & FAQ

Icc Profiles

Rebates

Tax Resale Certifications

Blog

Events

Videos

Who We Are

Career Opportunities

Locations

Our Guarantee

Live Chat

Call Us

Email Us

Address