Inkjet Printable Media

11 mil

145 gsm

Wall Murals, Interior Décor, Featured, Banner Stands, Temporary Outdoor Signage, POP/ Indoor Signage

Semi Matte

Aqueous, Latex

Opaque

Tyvek, Banner

100% Recyclable HDPE 1082 Tyvek®

145± 5% (70% less material than typical scrim banner)

63.64 (MD) Test Method ATSM D5035

-100° F- 270° F (-56° C- 104° C)

>98%

Compatible with all thermal and piezo inkjet printers using water-based dye and pigment-based inks as well as printers using latex ink technology.

The coating on this product is engineered for better than 400% ink coverage. To optimize print quality, the printer mode should be set to best and media selection should be set on Heavyweight Coated Paper up to 1440 dpi. However, we recommend a custom ICC profile for optimal results. Please refer to www.lexjet.com for an ICC profile for some printers.

Tyvek™ can be sewn, grommeted, or hemmed with LexJet Heavy Duty Banner Tape. Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.

For printing: 60° - 80° F, 50% Relative Humidity.

-40° - 176° F (-40° C to 80° C).

1 year from the LexJet ship date when stored in proper conditions.