43 in

3 in

300 ft

1 Roll

1x Edge Points

Mounting Adhesives

Rubber

Pressure Sensitive

POP/ Indoor Signage, Posters, Tradeshow

Acrylic

Permanent

A 1.2-mil, clear, permanent, rubber-based pressure sensitive adhesive.

74# polycoated, moisture-resistant

(PSTC 7, 1 sq. in., 1000 gr. load): no dwell @ 72° , Exposed side - 7+ Days, Liner side - 7+ Days.

Apply 80-100 psi and use 2-3 feet per minute for dwell time. Between 90° to 100° F heat is recommended to help the adhesive flow.

70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging.

The slip aid, which is often found on PVC materials, should be removed with a suitable detergent. Ask your LexJet solutions specialist for specific recommended mounting substrates. All substrates should be tested for your specific application prior to final job production.