38 in

2 mil

3 in

150 ft

1 Roll

1x Edge Points

Laminates & Coatings

Pressure Sensitive

POP / Indoor Signage, Dry Erase Boards

Gloss, Smooth

Pressure Sensitive

Polypropylene

This product is recommended for producing general purpose graphics, decals and unprinted substrates for use with dry erase pens. Typical substrates are paper, cardboard, photos and unprinted substrates. If producing industrial grade dry erase boards or multi layer laminates of either plastics or metal consult with your Concept sales representative. These include sign in boards typically found in hospitals, retail establishments and restaurants. For best results, we suggest the following dry erase brand marking pens: Avery Marks-a-lot® (chisel point), Expo Scents® (chisel point), Expo Bold color® (chisel Point), Expo regular® (chisel point) brand marking pens.

1 mil clear permanent acrylic pressure sensitive

No; indoor use only

All LexJet laminates are provided on 3" standard cores.

After applying the laminate, allow curing for a minimum of 2 hours before cutting or trimming. Maximum bond strength is reached in 24 hours.

40° F (4° C)

Limited. Dry Erase Film has limited resistance to UV exposure. Test fully for any extended outdoor use.

PSTC-1 with 24-hour dwell at 70°F and 50% relative humidity.

Good. Immersion not recommended.

70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging.

For best results, we suggest the following dry erase brand marking pens: Avery Marks-a-lot® (chisel point), Expo Scents® (chisel point), Expo Bold color® (chisel Point), Expo regular® (chisel point) brand marking pens.